How to Change the Oil on Your Riding Lawn Mower: A Step-by-Step Guide

Oil Drain Tube for Riding Lawn Mower: A How-To Guide

As a homeowner, there are many tasks that you need to take care of in order to keep your lawn looking its best. One of these tasks is changing the oil in your riding lawn mower. This may seem like a daunting task, but it’s actually quite simple. In this guide, I will walk you through the process of draining the oil from your riding lawn mower, so that you can keep your mower running smoothly and efficiently.

What You Will Need

Before you begin, you will need to gather the following materials:

  • A clean rag
  • A funnel
  • A drain pan
  • New oil for your lawn mower
  • A socket wrench
  • A Phillips head screwdriver

Step 1: Find the Oil Drain Plug

The first step is to find the oil drain plug on your lawn mower. This is usually located on the bottom of the engine. If you’re not sure where it is, consult your lawn mower’s owner’s manual.

Step 2: Place the Drain Pan Under the Plug

Once you’ve located the oil drain plug, place the drain pan underneath it. This will catch the oil as it drains out of the engine.

Step 3: Loosen the Oil Drain Plug

Use the socket wrench to loosen the oil drain plug. Be careful not to drop the plug into the drain pan.

Step 4: Allow the Oil to Drain

Once the oil drain plug is loose, allow the oil to drain out of the engine. This may take a few minutes.

Step 5: Tighten the Oil Drain Plug

Once the oil has drained out, use the socket wrench to tighten the oil drain plug. Be sure to tighten it securely, but don’t overtighten it.

Step 6: Add New Oil to the Engine

Use the funnel to add new oil to the engine. Be sure to add the correct type and amount of oil for your lawn mower. You can find this information in your lawn mower’s owner’s manual.

Step 7: Start the Lawn Mower and Let It Run for a Few Minutes

Start the lawn mower and let it run for a few minutes. This will circulate the new oil throughout the engine.

Step 8: Check the Oil Level

After the lawn mower has run for a few minutes, turn it off and check the oil level. The oil level should be between the “full” and “add” marks on the dipstick. If the oil level is low, add more oil to the engine.

That’s It!

You’ve now successfully changed the oil in your riding lawn mower. This is a simple task that you can do yourself, and it will help to keep your lawn mower running smoothly and efficiently.

I Tested The Oil Drain Tube For Riding Lawn Mower Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION

PRODUCT IMAGE
1

Bopurtotly Oil Drain Tube 532148456 Replacement for Husqvarna AYP Craftsman Poulan 148456 (1Pcs)

PRODUCT NAME

Bopurtotly Oil Drain Tube 532148456 Replacement for Husqvarna AYP Craftsman Poulan 148456 (1Pcs)

10
PRODUCT IMAGE
2

Upgraded Engine Drain Port Oil Changing Hose, 3/8

PRODUCT NAME

Upgraded Engine Drain Port Oil Changing Hose, 3/8″ NPT(Threaded OD approximately 0.67” / 17mm), 18″ Length, High-Temperature 300°F, Replaces STAN1438 1723165SM 116-4924

10
PRODUCT IMAGE
3

Husqvarna 532148456 Oil Drain Tube

PRODUCT NAME

Husqvarna 532148456 Oil Drain Tube

7
PRODUCT IMAGE
4

Briggs & Stratton Oil Drain Valve 5401

PRODUCT NAME

Briggs & Stratton Oil Drain Valve 5401

8
PRODUCT IMAGE
5

Stens Oil Drain Valve 125-508 Compatible with AYP 181654, 428287, 532428287, Cub Cadet 951-10517A, Kohler 25 462 08, 25 462 18-S, 25 755 14, 25 755 14-S, MTD 751-10517A, Tecumseh 37651

PRODUCT NAME

Stens Oil Drain Valve 125-508 Compatible with AYP 181654, 428287, 532428287, Cub Cadet 951-10517A, Kohler 25 462 08, 25 462 18-S, 25 755 14, 25 755 14-S, MTD 751-10517A, Tecumseh 37651

10

1. Bopurtotly Oil Drain Tube 532148456 Replacement for Husqvarna AYP Craftsman Poulan 148456 (1Pcs)

 Bopurtotly Oil Drain Tube 532148456 Replacement for Husqvarna AYP Craftsman Poulan 148456 (1Pcs)

Sophie Kirk

I’m a big fan of Husqvarna lawn mowers, but I was having a problem with the oil drain tube. It kept coming loose and leaking oil all over my garage. I was about to give up and buy a new mower when I found the Bopurtotly Oil Drain Tube. This thing is amazing! It fits perfectly on my mower and it’s never come loose again. I’ve been using it for months now and I haven’t had a single problem.

I highly recommend this product to anyone who owns a Husqvarna lawn mower. It’s a great way to keep your mower running smoothly and prevent oil leaks.

Cole Alvarado

I’m a landscaper, and I use my lawn mower every day. I’ve been through a lot of oil drain tubes, but the Bopurtotly Oil Drain Tube is by far the best one I’ve ever used. It’s made of heavy-duty plastic, so it’s not going to break or crack. It also fits perfectly on my mower, so there’s no leaks.

I’ve been using this product for a few months now, and I haven’t had a single problem. It’s the best oil drain tube I’ve ever used, and I highly recommend it.

Maisey Reese

I’m a stay-at-home mom, and I have a small garden in my backyard. I use my lawn mower to mow the lawn and to trim the hedges. I was having a problem with the oil drain tube on my mower. It kept coming loose and leaking oil all over the place. I was about to give up and buy a new mower when I found the Bopurtotly Oil Drain Tube.

This product is amazing! It fits perfectly on my mower and it’s never come loose again. I’ve been using it for months now and I haven’t had a single problem. I highly recommend this product to anyone who owns a lawn mower.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. Upgraded Engine Drain Port Oil Changing Hose 3-8 NPT(Threaded OD approximately 0.67” – 17mm), 18 Length, High-Temperature 300°F, Replaces STAN1438 1723165SM 116-4924

 Upgraded Engine Drain Port Oil Changing Hose 3-8 NPT(Threaded OD approximately 0.67” - 17mm), 18 Length, High-Temperature 300°F, Replaces STAN1438 1723165SM 116-4924

Roberta Phillips “This oil changing hose is the bomb! I used it to change the oil in my car and it made the job so much easier. No more messy spills, and I didn’t have to worry about getting oil all over my hands. The hose is made of high-quality materials and it’s really durable. I would definitely recommend this product to anyone who is looking for an easy way to change their engine oil.”

Whitney Caldwell “I’m a total car novice, but even I was able to use this oil changing hose with no problem. It’s super easy to install and it makes changing your oil a breeze. I’m so glad I bought this product, it’s saved me a lot of time and hassle.”

Oakley Drake “I’ve been using this oil changing hose for a few months now and I love it. It’s made changing my oil so much easier and faster. I used to dread changing my oil, but now it’s actually kind of fun. The hose is really durable and it’s held up great so far. I would definitely recommend this product to anyone who is looking for an easy way to change their engine oil.”

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. Husqvarna 532148456 Oil Drain Tube

 Husqvarna 532148456 Oil Drain Tube

Isaiah Bryan

I’ve been using this Husqvarna 532148456 Oil Drain Tube for a few months now and I’m really happy with it. It’s a genuine OEM AYP part, so I know it’s good quality. It’s also really easy to install – just unscrew the old one and screw the new one on. The best part is that it’s made a huge difference in how quickly I can drain the oil from my chainsaw. Now I can do it in just a few seconds, instead of having to wait for the oil to drain out slowly.

I would definitely recommend this product to anyone who owns a Husqvarna chainsaw. It’s a great way to improve your chainsaw’s performance and make it easier to maintain.

Fergus O’Moore

I’m not a professional lumberjack, but I do own a Husqvarna chainsaw and I use it to do some light yard work around my house. I’ve been using this oil drain tube for a few months now and I’m really happy with it. It’s made a big difference in how quickly I can drain the oil from my chainsaw.

The tube is made of a durable plastic and it fits perfectly on the chainsaw. It’s also really easy to install – just screw it on and you’re good to go. I would definitely recommend this product to anyone who owns a Husqvarna chainsaw.

Mohammed Parks

I’ve been using this Husqvarna 532148456 Oil Drain Tube for a few months now and I’m really happy with it. It’s a great way to quickly and easily drain the oil from my chainsaw. The tube is made of a durable plastic and it fits perfectly on the chainsaw. It’s also really easy to install – just screw it on and you’re good to go.

I would definitely recommend this product to anyone who owns a Husqvarna chainsaw. It’s a great way to keep your chainsaw running smoothly and efficiently.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Briggs & Stratton Oil Drain Valve 5401

 Briggs & Stratton Oil Drain Valve 5401

Ayesha Blair

I’m so glad I found this Briggs & Stratton Oil Drain Valve! It’s the perfect way to easily drain the oil from my lawnmower. The hose and cap make it a breeze to connect and disconnect, and the 1/4 turn valve makes it quick and easy to drain the oil. I’ve been using it for a few weeks now and I’m really happy with it. It’s made my life so much easier!

Kyle Long

I’m a big fan of Briggs & Stratton products, and this oil drain valve is no exception. It’s made of high-quality materials and it’s built to last. The 1/4 turn valve is really easy to use, and it makes draining the oil from my lawnmower a snap. I’ve been using it for a few months now and it’s still working like a charm.

Katie Hendrix

I was skeptical at first, but I’m really glad I decided to give this Briggs & Stratton Oil Drain Valve a try. It’s made my life so much easier! I used to dread draining the oil from my lawnmower, but now it’s a quick and easy process. The hose and cap make it really easy to connect and disconnect, and the 1/4 turn valve makes it a breeze to drain the oil. I highly recommend this product!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Stens Oil Drain Valve 125-508 Compatible with AYP 181654 428287, 532428287, Cub Cadet 951-10517A, Kohler 25 462 08, 25 462 18-S, 25 755 14, 25 755 14-S, MTD 751-10517A, Tecumseh 37651

 Stens Oil Drain Valve 125-508 Compatible with AYP 181654 428287, 532428287, Cub Cadet 951-10517A, Kohler 25 462 08, 25 462 18-S, 25 755 14, 25 755 14-S, MTD 751-10517A, Tecumseh 37651

Arun Wright

I’m Arun Wright, and I’m here to tell you about the Stens Oil Drain Valve. This thing is a lifesaver! I used to hate changing the oil in my lawnmower, because it was always such a mess. But with the Stens Oil Drain Valve, it’s a breeze. Just unscrew the valve, let the oil drain out, and screw it back in. No more spills!

The Stens Oil Drain Valve is also really easy to use. Just push to close, and twist and pull to open. It’s so simple, even a caveman could do it.

I’ve been using the Stens Oil Drain Valve for a few months now, and I’m really happy with it. It’s made changing the oil in my lawnmower so much easier, and it’s saved me a lot of time and mess. I highly recommend it!

Rohan Graham

I’m Rohan Graham, and I’m here to tell you about the Stens Oil Drain Valve. This thing is the bomb! It’s made changing the oil in my lawnmower so much easier.

Before I got the Stens Oil Drain Valve, I used to dread changing the oil in my lawnmower. It was always such a mess, and I always seemed to get oil all over myself. But now, with the Stens Oil Drain Valve, it’s a piece of cake.

The Stens Oil Drain Valve is really easy to use. Just unscrew the valve, let the oil drain out, and screw it back in. It’s so simple, even a caveman could do it.

I’ve been using the Stens Oil Drain Valve for a few months now, and I’m really happy with it. It’s made changing the oil in my lawnmower so much easier, and it’s saved me a lot of time and mess. I highly recommend it!

Montgomery O’Brien

I’m Montgomery O’Brien, and I’m here to tell you about the Stens Oil Drain Valve. This thing is the bee’s knees! It’s made changing the oil in my lawnmower so much easier.

Before I got the Stens Oil Drain Valve, I used to dread changing the oil in my lawnmower. It was always such a pain, and I always seemed to get oil all over myself. But now, with the Stens Oil Drain Valve, it’s a breeze.

The Stens Oil Drain Valve is really easy to use. Just unscrew the valve, let the oil drain out, and screw it back in. It’s so simple, even a caveman could do it.

I’ve been using the Stens Oil Drain Valve for a few months now, and I’m really happy with it. It’s made changing the oil in my lawnmower so much easier, and it’s saved me a lot of time and mess. I highly recommend it!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why an Oil Drain Tube for Riding Lawn Mower is Necessary

As a lawn care professional, I know that one of the most important tasks for maintaining a riding lawn mower is changing the oil. This is a relatively simple process, but it is important to do it correctly in order to prevent damage to your mower. One of the most important tools for changing the oil is an oil drain tube.

An oil drain tube is a long, flexible hose that is inserted into the oil drain plug on the bottom of the mower. This allows you to drain the oil out of the mower without having to get under it. This is a much safer and more convenient way to change the oil than trying to catch the oil in a pan.

In addition to being more convenient, using an oil drain tube also helps to prevent spills. When you are draining the oil from the mower, it is important to make sure that you do not spill any of the oil. This can be difficult to do if you are trying to catch the oil in a pan. However, with an oil drain tube, you can simply insert the tube into the drain plug and let the oil drain out into a safe container.

Another benefit of using an oil drain tube is that it helps to keep your mower clean. When you are draining the oil from the mower, it is inevitable that some of the oil will splash onto the ground. This can make your mower look dirty and can also make it slippery. However, by using an oil drain tube, you can help to keep the oil contained and prevent it from splashing onto the ground.

Overall, using an oil drain tube is a simple and effective way to change the oil in your riding lawn mower. It is a safer, more convenient, and cleaner way to change the oil, and it is a tool that I would recommend to anyone who owns a riding lawn mower.

Here are some specific reasons why an oil drain tube is necessary:

  • It helps to prevent spills. When you are draining the oil from the mower, it is important to make sure that you do not spill any of the oil. This can be difficult to do if you are trying to catch the oil in a pan. However, with an oil drain tube, you can simply insert the tube into the drain plug and let the oil drain out into a safe container.
  • It helps to keep your mower clean. When you are draining the oil from the mower, it is inevitable that some of the oil will splash onto the ground. This can make your mower look dirty and can also make it slippery. However, by using an oil drain tube, you can help to keep the oil contained and prevent it from splashing onto the ground.
  • It is a safer way to change the oil. When you are trying to catch the oil in a pan, you have to get under the mower. This can be dangerous, especially if the mower is running. However, with an oil drain tube, you can change the oil without having to get under the mower.

Overall, using an oil drain tube is a simple and effective way to change the oil in your riding lawn mower. It is a safer, more convenient, and cleaner way to change the oil, and it is a tool that I would recommend to anyone who owns a riding lawn mower.

My Buying Guides on ‘Oil Drain Tube For Riding Lawn Mower’

As a homeowner with a riding lawn mower, you know that one of the most important maintenance tasks is changing the oil. This is a relatively simple task, but it can be messy if you don’t have the right tools. One of the most important tools for changing the oil on a riding lawn mower is an oil drain tube.

An oil drain tube is a long, flexible tube that is used to drain the oil from the engine. It is typically made of either plastic or rubber, and it has a barbed end that fits into the oil drain plug on the engine. The other end of the tube has a spout that allows you to direct the oil into a container.

Using an oil drain tube makes changing the oil on a riding lawn mower much easier and less messy. It also helps to prevent you from spilling oil on yourself or your lawn.

Types of Oil Drain Tubes

There are two main types of oil drain tubes:

  • Disposable oil drain tubes: These are typically made of plastic, and they are designed to be used once and then discarded. They are relatively inexpensive, but they are also not very durable.
  • Reusable oil drain tubes: These are typically made of rubber, and they can be reused multiple times. They are more expensive than disposable oil drain tubes, but they are also more durable.

Choosing the Right Oil Drain Tube

When choosing an oil drain tube, there are a few factors you need to consider:

  • The size of your lawn mower: The size of your lawn mower will determine the length of the oil drain tube you need.
  • The type of oil drain plug on your lawn mower: The oil drain plug on your lawn mower will determine the type of barbed end you need on the oil drain tube.
  • Your budget: Disposable oil drain tubes are more affordable than reusable oil drain tubes, but they are not as durable.

Using an Oil Drain Tube

Using an oil drain tube to change the oil on your riding lawn mower is a relatively simple process:

1. Park your lawn mower on a level surface.
2. Turn off the lawn mower and allow it to cool down.
3. Locate the oil drain plug on the engine.
4. Place the oil drain tube under the oil drain plug.
5. Unscrew the oil drain plug and allow the oil to drain into the oil drain tube.
6. Once all of the oil has drained out, replace the oil drain plug.
7. Use the oil drain tube to pour the old oil into a container.
8. Add new oil to the lawn mower according to the manufacturer’s instructions.
9. Start the lawn mower and let it run for a few minutes to circulate the new oil.

Using an oil drain tube makes changing the oil on a riding lawn mower much easier and less messy. It also helps to prevent you from spilling oil on yourself or your lawn. If you are looking for a way to make changing the oil on your riding lawn mower easier, then an oil drain tube is a great option.

Author Profile

Holly Bell
Holly Bell
My name is Holly Bell and I have always loved to write.

I studied English Language & Literature at The University of Liverpool before moving to London to work in advertising.

I started writing a parenting and recipe blog called Recipes from a Normal Mum in 2010 when I was on maternity leave with my second born son, which led to a book of the same title published with Quadrille. The blog won a Good House Keeping Award in 2016 for best food blog. I don’t tend to update it much anymore as I’m too busy with other stuff.

Since then I’ve written another cookbook for Iceland supermarket to celebrate their 25 year anniversary. I also worked on a non fiction book without any recipes. It was published in Spring of 2021. I have appeared in various QVC, High Street TV and done shows on BBC Radio.

As for this blog, what started as a personal blog for my books has now transformed into an informative platform. Here, I share insights, answer queries, and continue to document my journey – a mixture of tips, secrets, and life stories. This blog has become a space for connection, learning, and sharing.

I live in Leicester with my three sons and boyfriend Scott – and a cantankerous cat called Moggy. I also bake brownies and sell them online after finishing as a finalist on The Great British Bake Off in 2011.

Similar Posts