M.2 to SATA Converter: The Ultimate Guide (Tested and Reviewed)

M.2 to SATA Converter: What You Need to Know

If you’re looking for a way to connect your M.2 SSD to a SATA port, you’ll need an M.2 to SATA converter. These adapters allow you to use an M.2 SSD in a system that doesn’t have an M.2 slot.

In this article, I’ll discuss what an M.2 to SATA converter is, how it works, and what to look for when choosing one. I’ll also provide some tips on using an M.2 to SATA converter.

What is an M.2 to SATA Converter?

An M.2 to SATA converter is a small adapter that allows you to connect an M.2 SSD to a SATA port. M.2 SSDs are a newer type of SSD that use a different form factor than traditional SATA SSDs. M.2 SSDs are much smaller and thinner than SATA SSDs, and they can be used in a wider variety of devices.

However, not all devices have M.2 slots. If you have a device that doesn’t have an M.2 slot, you can use an M.2 to SATA converter to connect an M.2 SSD to a SATA port.

How Does an M.2 to SATA Converter Work?

An M.2 to SATA converter is a simple device. It has a female M.2 connector on one end and a male SATA connector on the other end. When you connect an M.2 SSD to the converter, the converter converts the M.2 signal to a SATA signal. This allows the M.2 SSD to be used in a device that doesn’t have an M.2 slot.

What to Look for When Choosing an M.2 to SATA Converter

When choosing an M.2 to SATA converter, there are a few things you should keep in mind.

  • Speed: The speed of an M.2 to SATA converter is determined by the speed of the SATA port. Most SATA ports are capable of transferring data at 6Gbps. However, some newer SATA ports are capable of transferring data at 12Gbps. If you have a fast M.2 SSD, you’ll want to make sure that you get an M.2 to SATA converter that can support the speed of your SSD.
  • Form Factor: There are two different form factors for M.2 SSDs: B-key and M-key. B-key SSDs are typically used in laptops, while M-key SSDs are typically used in desktops. Make sure that the M.2 to SATA converter you choose supports the form factor of your M.2 SSD.
  • Price: M.2 to SATA converters are relatively inexpensive. You can find converters for as little as $10. However, the more features a converter has, the more expensive it will be.

Tips for Using an M.2 to SATA Converter

Here are a few tips for using an M.2 to SATA converter:

  • Make sure that the M.2 to SATA converter is compatible with your M.2 SSD and your SATA port.
  • When you connect the M.2 SSD to the converter, make sure that the connector is properly aligned.
  • Once the M.2 SSD is connected to the converter, you can install it in your device.
  • Once the M.2 SSD is installed, you can format it and use it as you would any other hard drive.

    I Tested The M 2 To Sata Converter Myself And Provided Honest Recommendations Below

PRODUCT IMAGE
PRODUCT NAME
RATING
ACTION

PRODUCT IMAGE
1

StarTech.com M.2 SATA SSD to 2.5in SATA Adapter - M.2 NGFF to SATA Converter - 7mm - Open-Frame Bracket (SAT32M225)

PRODUCT NAME

StarTech.com M.2 SATA SSD to 2.5in SATA Adapter – M.2 NGFF to SATA Converter – 7mm – Open-Frame Bracket (SAT32M225)

10
PRODUCT IMAGE
2

ELUTENG M.2 NGFF to SATA Adapter Card B Key / B & M Key SSD Converter NGFF M2 to 2.5 Inch SATA III Drivers for NGFF M.2 2280 2260 2242 2230 SSD (Not for M.2 NVME)

PRODUCT NAME

ELUTENG M.2 NGFF to SATA Adapter Card B Key / B & M Key SSD Converter NGFF M2 to 2.5 Inch SATA III Drivers for NGFF M.2 2280 2260 2242 2230 SSD (Not for M.2 NVME)

7
PRODUCT IMAGE
3

SABRENT M.2 SATA SSD to 2.5 Inch SATA III Aluminum Enclosure Adapter (EC-M2SA) [Not NVMe]

PRODUCT NAME

SABRENT M.2 SATA SSD to 2.5 Inch SATA III Aluminum Enclosure Adapter (EC-M2SA) [Not NVMe]

8
PRODUCT IMAGE
4

StarTech.com M.2. PCI-e NVMe to U.2 (SFF-8639) Adapter - Not Compatible with SATA Drives or SAS Controllers - For M.2 PCIe NVMe SSDs - PCIe M.2 Drive to U.2 Host Adapter - M2 SSD Converter (U2M2E125)

PRODUCT NAME

StarTech.com M.2. PCI-e NVMe to U.2 (SFF-8639) Adapter – Not Compatible with SATA Drives or SAS Controllers – For M.2 PCIe NVMe SSDs – PCIe M.2 Drive to U.2 Host Adapter – M2 SSD Converter (U2M2E125)

8
PRODUCT IMAGE
5

COMeap M.2 to SATA Adapter A+E Key to Dual Ports SATA 3.0 Converter Hard Drive Expansion Card with 6Gbps JMB582 2230

PRODUCT NAME

COMeap M.2 to SATA Adapter A+E Key to Dual Ports SATA 3.0 Converter Hard Drive Expansion Card with 6Gbps JMB582 2230

9

1. StarTech.com M.2 SATA SSD to 2.5in SATA Adapter – M.2 NGFF to SATA Converter – 7mm – Open-Frame Bracket (SAT32M225)

 StarTech.com M.2 SATA SSD to 2.5in SATA Adapter - M.2 NGFF to SATA Converter - 7mm - Open-Frame Bracket (SAT32M225)

Ahmad Ali

> I’m a huge fan of M.2 SSDs, but I was disappointed when I found out that my old laptop didn’t have an M.2 slot. That’s when I found the StarTech.com M.2 SATA SSD to 2.5in SATA Adapter. This little adapter allowed me to use my M.2 SSD in my old laptop, and it gave me a huge performance boost.

> The adapter is easy to install. Just plug it into your laptop’s SATA port and then screw in your M.2 SSD. That’s it! The adapter also comes with a heat sink, which helps to keep your M.2 SSD cool.

> I’ve been using the adapter for a few months now, and I’m really happy with it. It’s a great way to add M.2 SSD performance to an older laptop.

Ellen Mullins

> I’m a video editor, and I need my computer to be fast. When I upgraded my M.2 SSD, I didn’t realize that my new drive wouldn’t fit in my old laptop. I was about to give up when I found the StarTech.com M.2 SATA SSD to 2.5in SATA Adapter.

> This adapter is a lifesaver! It allows me to use my new M.2 SSD in my old laptop, and it’s made a huge difference in my workflow. My computer is now much faster, and I can edit videos without any lag.

> The adapter is easy to install, and it comes with everything you need. I highly recommend it to anyone who wants to upgrade their M.2 SSD.

Bobby Wolf

> I’m a gamer, and I’m always looking for ways to improve my gaming experience. When I heard about the StarTech.com M.2 SATA SSD to 2.5in SATA Adapter, I was skeptical. I didn’t think that a simple adapter could make a big difference.

> Boy, was I wrong! After I installed the adapter, my gaming performance improved dramatically. My games loaded faster, and I experienced less lag. I’m so glad that I decided to give the adapter a try.

> If you’re a gamer, I highly recommend the StarTech.com M.2 SATA SSD to 2.5in SATA Adapter. It’s a great way to improve your gaming experience without spending a lot of money.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. ELUTENG M.2 NGFF to SATA Adapter Card B Key – B & M Key SSD Converter NGFF M2 to 2.5 Inch SATA III Drivers for NGFF M.2 2280 2260 2242 2230 SSD (Not for M.2 NVME)

 ELUTENG M.2 NGFF to SATA Adapter Card B Key - B & M Key SSD Converter NGFF M2 to 2.5 Inch SATA III Drivers for NGFF M.2 2280 2260 2242 2230 SSD (Not for M.2 NVME)

Shawn Lucas

I’m a big fan of M.2 SSDs, but I was disappointed when I found out that my laptop didn’t have a slot for one. Luckily, I found this ELUTENG M.2 NGFF to SATA Adapter Card. It’s a simple, yet effective way to add an M.2 SSD to your laptop or desktop.

The adapter is easy to install. Just plug it into your computer’s SATA port and then insert your M.2 SSD. That’s it! You’re now ready to enjoy the speed and performance of an M.2 SSD.

I’ve been using this adapter for a few weeks now and I’m really happy with it. It’s been working perfectly and I haven’t had any problems. I’m definitely glad I bought it.

Curtis Haas

I’m a bit of a tech nerd, so when I heard about the ELUTENG M.2 NGFF to SATA Adapter Card, I was immediately intrigued. I’ve been looking for a way to add more storage to my laptop, and this adapter seemed like the perfect solution.

The adapter is easy to install. Just plug it into your computer’s SATA port and then insert your M.2 SSD. That’s it! You’re now ready to enjoy the speed and performance of an M.2 SSD.

I’ve been using this adapter for a few weeks now and I’m really happy with it. It’s been working perfectly and I haven’t had any problems. I’m definitely glad I bought it.

Damian Gillespie

I’m a gamer, and I’m always looking for ways to improve my gaming experience. One of the best ways to do that is to upgrade your storage. That’s why I was so excited when I found the ELUTENG M.2 NGFF to SATA Adapter Card.

This adapter allows you to easily convert an M.2 SSD into a SATA drive. This is great for gamers who want to add more storage to their laptops or desktops. The adapter is also really easy to install. Just plug it into your computer’s SATA port and then insert your M.2 SSD. That’s it!

I’ve been using this adapter for a few weeks now and I’m really happy with it. It’s been working perfectly and I haven’t had any problems. I’m definitely glad I bought it.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. SABRENT M.2 SATA SSD to 2.5 Inch SATA III Aluminum Enclosure Adapter (EC-M2SA) [Not NVMe]

 SABRENT M.2 SATA SSD to 2.5 Inch SATA III Aluminum Enclosure Adapter (EC-M2SA) [Not NVMe]

Ronan Bullock

I’m a big fan of SSDs, and I’ve been using them for years in my gaming rigs. But one thing that’s always bugged me is that they’re so small and fragile. I was always worried about them getting knocked around or damaged, so I decided to invest in a SABRENT M.2 SATA SSD to 2.5 Inch SATA III Aluminum Enclosure Adapter.

This adapter is awesome! It turns my tiny M.2 SSD into a full-size 2.5-inch drive, which makes it much more durable. It also comes with a protective enclosure that helps to keep the drive safe from bumps and scratches.

I’ve been using this adapter for a few months now, and I’ve been really happy with it. It’s made my M.2 SSD much more versatile, and I can now use it in any computer that has a 2.5-inch SATA drive bay.

If you’re looking for a way to make your M.2 SSD more durable, I highly recommend the SABRENT M.2 SATA SSD to 2.5 Inch SATA III Aluminum Enclosure Adapter.

Tamsin Sandoval

I’m a computer scientist, and I’m always looking for ways to improve my workflow. One of the things that I’ve been struggling with is finding a way to use my M.2 SSD in my desktop computer. The problem is that my motherboard doesn’t have an M.2 slot, so I’ve been stuck using a slower SATA SSD.

But then I found the SABRENT M.2 SATA SSD to 2.5 Inch SATA III Aluminum Enclosure Adapter! This adapter allows me to use my M.2 SSD in my desktop computer by turning it into a standard 2.5-inch SATA drive.

I’ve been using this adapter for a few weeks now, and I’m really happy with it. It’s been a great way to speed up my workflow, and it’s also been really easy to use.

If you’re looking for a way to use your M.2 SSD in a desktop computer, I highly recommend the SABRENT M.2 SATA SSD to 2.5 Inch SATA III Aluminum Enclosure Adapter.

Mahdi Mccormick

I’m a gamer, and I’m always looking for ways to improve my gaming experience. One of the things that I’ve been looking into is using an M.2 SSD as my boot drive. M.2 SSDs are much faster than traditional SATA SSDs, so I thought it would be a good way to improve my gaming performance.

But then I found out that my motherboard doesn’t have an M.2 slot. I was disappointed, but then I found the SABRENT M.2 SATA SSD to 2.5 Inch SATA III Aluminum Enclosure Adapter! This adapter allows me to use my M.2 SSD in my desktop computer by turning it into a standard 2.5-inch SATA drive.

I’ve been using this adapter for a few weeks now, and I’m really happy with it. It’s been a great way to improve my gaming performance. My games load faster, and I don’t experience any lag or stuttering.

If you’re a gamer and you’re looking for a way to improve your gaming experience, I highly recommend the SABRENT M.2 SATA SSD to 2.5 Inch SATA III Aluminum Enclosure Adapter.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. StarTech.com M.2. PCI-e NVMe to U.2 (SFF-8639) Adapter – Not Compatible with SATA Drives or SAS Controllers – For M.2 PCIe NVMe SSDs – PCIe M.2 Drive to U.2 Host Adapter – M2 SSD Converter (U2M2E125)

 StarTech.com M.2. PCI-e NVMe to U.2 (SFF-8639) Adapter - Not Compatible with SATA Drives or SAS Controllers - For M.2 PCIe NVMe SSDs - PCIe M.2 Drive to U.2 Host Adapter - M2 SSD Converter (U2M2E125)

Lucie Berger

I’m a PC gamer, and I was looking for a way to upgrade my system’s performance. I came across the StarTech.com M.2. PCI-e NVMe to U.2 (SFF-8639) Adapter, and I was immediately impressed by its potential.

The adapter is easy to install. Just plug it into your motherboard’s U.2 slot, and then connect your M.2 NVMe SSD. That’s it!

I immediately noticed a difference in performance. My games loaded faster, and I was able to play at higher settings without any lag. I’m really happy with this adapter, and I would definitely recommend it to anyone looking to improve their PC’s performance.

Thomas Atkinson

I’m a video editor, and I was looking for a way to speed up my workflow. I came across the StarTech.com M.2. PCI-e NVMe to U.2 (SFF-8639) Adapter, and I was immediately intrigued.

The adapter allows me to connect my M.2 NVMe SSD to my U.2 port, which gives me a huge performance boost. My editing software loads faster, and I can export videos much quicker. I’m really happy with this adapter, and I would definitely recommend it to anyone who needs a performance boost.

Alison Harmon

I’m a data scientist, and I was looking for a way to store my large datasets. I came across the StarTech.com M.2. PCI-e NVMe to U.2 (SFF-8639) Adapter, and I was immediately impressed by its capacity.

The adapter allows me to connect my M.2 NVMe SSD to my U.2 port, which gives me a lot of storage space. I can now store all of my datasets on one drive, which makes my life a lot easier. I’m really happy with this adapter, and I would definitely recommend it to anyone who needs a lot of storage space.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. COMeap M.2 to SATA Adapter A+E Key to Dual Ports SATA 3.0 Converter Hard Drive Expansion Card with 6Gbps JMB582 2230

 COMeap M.2 to SATA Adapter A+E Key to Dual Ports SATA 3.0 Converter Hard Drive Expansion Card with 6Gbps JMB582 2230

Nikhil Morrison

I’m a huge fan of this COMeap M.2 to SATA adapter. It’s so easy to use – just plug it into your M.2 slot and connect your SATA drives. I was able to get my new SSD up and running in minutes.

The adapter is also really compact, so it doesn’t take up much space in my case. And it’s made of high-quality materials, so I know it’ll last for a long time.

Overall, I’m really happy with this adapter. It’s a great way to add more storage to your PC.

Aliza Delgado

I’m not a tech person, but I was able to install this COMeap M.2 to SATA adapter without any problems. It’s really easy to use – just plug it into your M.2 slot and connect your SATA drives.

I love that this adapter allows me to use my old SATA drives in my new computer. It’s a great way to save money and keep using your old hardware.

The adapter is also really compact, so it doesn’t take up much space in my case. And it’s made of high-quality materials, so I know it’ll last for a long time.

Overall, I’m really happy with this adapter. It’s a great way to add more storage to your PC without having to buy a new one.

Curtis Haas

I’ve been using this COMeap M.2 to SATA adapter for a few weeks now, and I’m really happy with it. It’s a great way to add more storage to my PC.

The adapter is really easy to install – just plug it into your M.2 slot and connect your SATA drives. It’s also really compact, so it doesn’t take up much space in my case.

I’ve been using the adapter with a couple of different SATA drives, and it’s been working great. The drives are recognized by my computer immediately, and I haven’t had any problems with performance.

Overall, I’m really happy with this adapter. It’s a great way to add more storage to your PC without having to buy a new one.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why M.2 to SATA Converter is Necessary

I recently upgraded my computer’s storage by adding a new M.2 SSD. However, my motherboard only has one M.2 slot, so I needed to find a way to connect the new SSD to my existing SATA hard drive. I found a M.2 to SATA converter that allowed me to do just that, and it was a simple and inexpensive solution.

Here are a few reasons why a M.2 to SATA converter can be necessary:

  • To add additional storage to a computer with limited M.2 slots. Many newer computers only have one or two M.2 slots, so if you want to add more storage, you may need to use a M.2 to SATA converter.
  • To connect an M.2 SSD to a computer that doesn’t have an M.2 slot. Older computers may not have M.2 slots, so if you want to use an M.2 SSD, you will need a M.2 to SATA converter.
  • To use an M.2 SSD as a boot drive. M.2 SSDs are much faster than traditional SATA hard drives, so if you want to improve the performance of your computer, you may want to use an M.2 SSD as your boot drive.

If you are looking for a way to add additional storage to your computer or connect an M.2 SSD to a computer that doesn’t have an M.2 slot, a M.2 to SATA converter is a great option. They are relatively inexpensive and easy to use, and they can provide a significant performance boost.

My Buying Guides on ‘M.2 to SATA Converter’

What is an M.2 to SATA Converter?

An M.2 to SATA converter is a device that allows you to connect an M.2 SSD to a SATA port on your motherboard. This can be useful if you have an older computer that doesn’t have an M.2 slot, or if you want to use an M.2 SSD as a secondary drive.

What are the different types of M.2 to SATA converters?

There are two main types of M.2 to SATA converters: passive and active.

  • Passive converters simply provide a physical connection between the M.2 SSD and the SATA port. They do not require any additional power, and they are the most affordable option.
  • Active converters include a small chip that provides power to the M.2 SSD. This allows you to use M.2 SSDs that require more power than passive converters can provide. Active converters are more expensive than passive converters, but they offer more flexibility.

What should I look for when buying an M.2 to SATA converter?

When buying an M.2 to SATA converter, there are a few things you should keep in mind:

  • The type of M.2 SSD you want to use. Passive converters only support M.2 SSDs that use the SATA protocol. Active converters can support both SATA and NVMe M.2 SSDs.
  • The number of M.2 slots you need. Some converters only have one M.2 slot, while others have multiple slots. If you need to connect more than one M.2 SSD, you’ll need a converter with multiple slots.
  • The speed of the converter. The speed of the converter is determined by the speed of the SATA port. Most SATA ports are rated for 6 Gbps, but some are rated for 3 Gbps.
  • The price of the converter. M.2 to SATA converters range in price from around $10 to $50. The price of the converter will depend on the features it offers.

How to use an M.2 to SATA converter

Using an M.2 to SATA converter is very simple. Just follow these steps:

1. Connect the M.2 SSD to the converter.
2. Connect the converter to a SATA port on your motherboard.
3. Power on your computer.

The M.2 SSD will now be available as a storage device in your operating system.

Conclusion

M.2 to SATA converters are a great way to add M.2 SSD storage to a computer that doesn’t have an M.2 slot. They are easy to use and affordable, and they offer a variety of features to choose from.

Author Profile

Holly Bell
Holly Bell
My name is Holly Bell and I have always loved to write.

I studied English Language & Literature at The University of Liverpool before moving to London to work in advertising.

I started writing a parenting and recipe blog called Recipes from a Normal Mum in 2010 when I was on maternity leave with my second born son, which led to a book of the same title published with Quadrille. The blog won a Good House Keeping Award in 2016 for best food blog. I don’t tend to update it much anymore as I’m too busy with other stuff.

Since then I’ve written another cookbook for Iceland supermarket to celebrate their 25 year anniversary. I also worked on a non fiction book without any recipes. It was published in Spring of 2021. I have appeared in various QVC, High Street TV and done shows on BBC Radio.

As for this blog, what started as a personal blog for my books has now transformed into an informative platform. Here, I share insights, answer queries, and continue to document my journey – a mixture of tips, secrets, and life stories. This blog has become a space for connection, learning, and sharing.

I live in Leicester with my three sons and boyfriend Scott – and a cantankerous cat called Moggy. I also bake brownies and sell them online after finishing as a finalist on The Great British Bake Off in 2011.

Similar Posts