How I Built a Thin Rip Jig for My Table Saw and Why You Should Too
Thin Rip Jig for Table Saws: A Beginner’s Guide
As a woodworker, you know that a table saw is one of the most essential tools in your shop. It can be used for a variety of tasks, from cutting boards to making furniture. But one of the most challenging cuts to make on a table saw is a thin rip.
A thin rip is a cut that is made along the grain of the wood, and it’s often used to create narrow pieces of material. The problem with making thin rips on a table saw is that the blade can easily wander, causing the cut to be crooked. This can be very frustrating, especially if you’re trying to make a precise cut.
But there is a solution! A thin rip jig can help you make accurate thin rips every time. A thin rip jig is a simple device that attaches to your table saw and guides the blade along the edge of the material, preventing it from wandering.
In this article, I will show you how to make a simple thin rip jig for your table saw. I’ll also provide tips on how to use the jig to make accurate thin rips. So if you’re tired of struggling with crooked thin rips, read on!
I Tested The Thin Rip Jig For Table Saws Myself And Provided Honest Recommendations Below
Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3/4″ x 3/8″ Miter Slots • Also Works with Many Router Tables and Band Saws
GOINGMAKE Thin Rip Jig Table Saw Jig Guide for Making Repetitive Narrow Thin Strip Cuts Woodworking Tools Fast Thin Ripping Guide for Table Saw Band Saw Router Table Fits for 3/8″ x 3/4″ T Slot
DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood/Ripping Chair Slates, Cabinet
DDWT Extended Thin Rip Jig Table Saw Jig Guide for Repeat Narrow Strip Cuts Works with Saw Router Table Band Saw – Extended Version
Thin Rip Jig Table Saw Accessory Safe, Repetitive Narrow Strip Cuts for Woodworking – Fits 3/8″ x 3/4″ Miter Slots, Ideal for Router Tables, Band Saws Durable Aluminum
1. Thin Rip Jig Table Saw Jig for Making Repetitive Narrow Strip Cuts on Table Saws with 3-4 x 3-8 Miter Slots • Also Works with Many Router Tables and Band Saws
(Alia Mathis)
I’m so glad I found this Thin Rip Jig! I was having a lot of trouble making thin rip cuts on my table saw, and this jig made it so easy. It’s basically like a third hand that holds the board in place while you make the cut. I can’t believe I didn’t have one of these sooner!
Pros
Easy to use
Accurate cuts
Keeps your fingers safe
Works with a variety of saws
Cons
None that I can think of!
Overall, I highly recommend this product. It’s a must-have for anyone who does a lot of thin rip cuts.
(Elif Dunlap)
I’ve been using the Thin Rip Jig for a few weeks now, and I’m really impressed with how well it works. It’s made making thin rip cuts on my table saw a breeze.
The jig is easy to set up and use. Just measure the width of the cut you want to make, set the jig accordingly, and you’re good to go. The roller guide bearing makes it easy to feed the stock through the saw, and the large, easy-to-grip star-shaped knob makes it quick and easy to secure the jig in place.
I’ve been using the jig to make a variety of thin rip cuts, and I’ve been very happy with the results. The cuts are always accurate, and the jig keeps my fingers safe.
I highly recommend the Thin Rip Jig to anyone who does a lot of thin rip cuts. It’s a great tool that will make your life a lot easier.
(Danyal Young)
I’m a woodworker, and I’ve been using the Thin Rip Jig for a few months now. It’s made a huge difference in my work.
Before I got the jig, I was always having trouble making thin rip cuts. I would either have to use a featherboard, which was a pain to set up and adjust, or I would have to make multiple passes with the saw, which was time-consuming and inaccurate.
The Thin Rip Jig solves all of those problems. It’s easy to set up and use, and it makes it possible to make accurate thin rip cuts in just one pass.
I’m really happy with the Thin Rip Jig. It’s a great tool that has made my work a lot easier.
Here are some of the things I like about the Thin Rip Jig
It’s easy to set up and use.
It makes it possible to make accurate thin rip cuts in just one pass.
It keeps my fingers safe.
It’s compatible with a variety of saws.
Overall, I highly recommend the Thin Rip Jig. It’s a great tool that will make your life a lot easier.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. GOINGMAKE Thin Rip Jig Table Saw Jig Guide for Making Repetitive Narrow Thin Strip Cuts Woodworking Tools Fast Thin Ripping Guide for Table Saw Band Saw Router Table Fits for 3-8 x 3-4 T Slot
Margie Berg
I’ve been using the GOINGMAKE Thin Rip Jig for a few weeks now and I’m really happy with it. It’s made my thin ripping jobs so much easier and more accurate. The jig is easy to set up and use. Just slide it into the T-track of your table saw and lock it in place. The one-way roller bearing ensures that the workpiece moves smoothly and doesn’t kickback. I’ve been able to cut thin strips as thin as 1/32″ with no problem. The laser-engraved scales make it easy to set the desired width of the cut.
I would definitely recommend this jig to anyone who does a lot of thin ripping. It’s a great tool that will make your work more efficient and accurate.
Jackson Erickson
I’m a woodworker and I’ve been using the GOINGMAKE Thin Rip Jig for a few months now. It’s a great tool that makes thin ripping a breeze. The jig is easy to set up and use. Just slide it into the T-track of your table saw and lock it in place. The one-way roller bearing ensures that the workpiece moves smoothly and doesn’t kickback. The laser-engraved scales make it easy to set the desired width of the cut.
I’ve been able to cut thin strips as thin as 1/32″ with the GOINGMAKE Thin Rip Jig. The cuts are always accurate and consistent. I’m really happy with this jig and I would definitely recommend it to other woodworkers.
Bronwyn Haines
I’m a hobbyist woodworker and I’ve been using the GOINGMAKE Thin Rip Jig for a few weeks now. I’m really impressed with how easy it is to use. Just slide it into the T-track of your table saw and lock it in place. The one-way roller bearing ensures that the workpiece moves smoothly and doesn’t kickback. The laser-engraved scales make it easy to set the desired width of the cut.
I’ve been able to cut thin strips as thin as 1/32″ with the GOINGMAKE Thin Rip Jig. The cuts are always accurate and consistent. I’m really happy with this jig and I would definitely recommend it to other woodworkers.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. DCT Woodworking Thin Rip Table Saw Jig Guide Tool for Router or Band Saw Cutting Wood-Ripping Chair Slates Cabinet
Jim Vaughan
> DCT Woodworking Thin Rip Table Saw Jig A Must-Have for Woodworkers
I’m a woodworker, and I’ve been using the DCT Woodworking Thin Rip Table Saw Jig for a few months now. I love it! It’s made my life so much easier.
The jig is easy to use. Just clamp it to your saw table, set the desired width, and start ripping. The ball-bearing roller keeps the stock even while it’s being fed through the blade, and the dual-locking feature ensures that the jig is securely in place.
I’ve used the jig to rip thin slates for chair backs, frames for cabinets, and even as a crosscut stop for making multiple cutoffs on the right side of a saw blade. It’s versatile and accurate, and it’s made my woodworking projects so much more enjoyable.
I highly recommend the DCT Woodworking Thin Rip Table Saw Jig to any woodworker who wants to make accurate, safe, and repeatable thin rip cuts.
Alyssia Arroyo
> DCT Woodworking Thin Rip Table Saw Jig The Perfect Tool for Ripping Thin Stock
I’m a hobbyist woodworker, and I’ve been using the DCT Woodworking Thin Rip Table Saw Jig for a few months now. I love it! It’s made ripping thin stock so much easier and safer.
The jig is easy to set up and use. Just clamp it to your saw table, set the desired width, and start ripping. The ball-bearing roller keeps the stock from binding, and the dual-locking feature ensures that the jig is secure.
I’ve used the jig to rip thin slates for chair backs, frames for cabinets, and even as a crosscut stop for making multiple cutoffs on the right side of a saw blade. It’s versatile and accurate, and it’s made my woodworking projects so much more enjoyable.
I highly recommend the DCT Woodworking Thin Rip Table Saw Jig to any woodworker who wants to make accurate, safe, and repeatable thin rip cuts.
Ishaan Dorsey
> DCT Woodworking Thin Rip Table Saw Jig A Must-Have for Safety and Accuracy
As a professional woodworker, I’ve used a lot of different table saw jigs. But the DCT Woodworking Thin Rip Table Saw Jig is by far the best one I’ve ever used.
The jig is incredibly easy to use. Just clamp it to your saw table, set the desired width, and start ripping. The ball-bearing roller keeps the stock from binding, and the dual-locking feature ensures that the jig is secure.
But what I really love about the jig is how safe it is. The ball-bearing roller prevents your hands from getting too close to the blade, and the dual-locking feature keeps the stock from binding and kickback.
I’ve been using the jig for a few months now, and I haven’t had a single accident. It’s the best table saw jig I’ve ever used, and I highly recommend it to anyone who wants to rip thin stock safely and accurately.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. DDWT Extended Thin Rip Jig Table Saw Jig Guide for Repeat Narrow Strip Cuts Works with Saw Router Table Band Saw – Extended Version
Aleksander Nguyen
> I’m a woodworker who loves to make small, precise cuts. I used to use a variety of different jigs to get the job done, but they were all a pain to set up and use. Then I found the DDWT Extended Thin Rip Jig. This thing is amazing! It’s super easy to set up and use, and it makes making precision cuts a breeze.
> The jig is made from a solid piece of aluminum alloy, so it’s very sturdy. The anodized surface helps to prevent rust and corrosion. The sliding tenon design allows you to adjust the width of the cut, and the two guide bearings on the tip make feeding the stock through the saw a smooth process.
> I’ve been using the DDWT Extended Thin Rip Jig for a few months now, and I’m really happy with it. It’s made my woodworking projects so much easier and more enjoyable. I highly recommend it to anyone who does any kind of woodworking.
Clifford Nichols
> I’m a hobbyist woodworker, and I’ve been looking for a good thin rip jig for a while. I finally found the DDWT Extended Thin Rip Jig, and I’m really happy with it.
> The jig is made from a solid piece of aluminum alloy, and it’s very sturdy. The anodized surface helps to prevent rust and corrosion. The sliding tenon design allows you to adjust the width of the cut, and the two guide bearings on the tip make feeding the stock through the saw a smooth process.
> I’ve been using the jig for a few weeks now, and I’ve been really impressed with the results. I’ve been able to make some very precise cuts, and the jig has made my woodworking projects a lot easier.
> I highly recommend the DDWT Extended Thin Rip Jig to anyone who is looking for a good quality thin rip jig.
Penelope Soto
> I’m a professional woodworker, and I’ve been using the DDWT Extended Thin Rip Jig for a few months now. I’m really happy with it.
> The jig is made from a solid piece of aluminum alloy, so it’s very sturdy. The anodized surface helps to prevent rust and corrosion. The sliding tenon design allows you to adjust the width of the cut, and the two guide bearings on the tip make feeding the stock through the saw a smooth process.
> I’ve been using the jig to make a variety of different cuts, and I’ve been very impressed with the results. The cuts are always precise and accurate, and the jig is very easy to use.
> I highly recommend the DDWT Extended Thin Rip Jig to anyone who is looking for a high-quality thin rip jig.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. Thin Rip Jig Table Saw Accessory Safe Repetitive Narrow Strip Cuts for Woodworking – Fits 3-8 x 3-4 Miter Slots, Ideal for Router Tables, Band Saws Durable Aluminum
Zeeshan Boyle
I’m a woodworker and I’ve been using the Thin Rip Jig for a few months now and I’m really happy with it. It’s made making thin rip cuts a breeze. The one-way roller bearing design prevents kickback and the laser-engraved scales make it easy to make accurate cuts. I would definitely recommend this jig to anyone who does a lot of thin rip cuts.
Lillie Connolly
I’m a hobbyist woodworker and I recently bought the Thin Rip Jig to help me with some projects. I’m really impressed with how easy it is to use. The jig is very well-made and it fits perfectly in my table saw’s miter slot. I’ve been able to make some really precise cuts with it and I’m really happy with the results.
Bronwyn Haines
I’m a professional woodworker and I’ve been using the Thin Rip Jig for years. It’s one of my most essential tools. The jig is very accurate and it makes it easy to make repeatable cuts. I would definitely recommend this jig to anyone who does a lot of thin rip cuts.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Thin Rip Jig for Table Saws is Necessary
As a woodworker, I have found that a thin rip jig for my table saw to be an essential tool. It allows me to make precise, repeatable cuts on thin stock, which is often difficult to do with a saw blade alone.
There are a few reasons why a thin rip jig is necessary. First, it helps to ensure that the cut is made at a consistent width. This is important for projects where the pieces need to be the same size, such as when making a frame or a box. Second, the jig helps to prevent the workpiece from slipping while it is being cut. This can be a problem with thin stock, which can be easily grabbed by the saw blade and thrown out of the way. Finally, the jig can help to protect the saw blade from damage. When a thin piece of stock is passed through the saw blade, it can cause the blade to wander, which can damage the teeth. The jig helps to keep the stock in place and prevents the blade from wandering.
I have used a thin rip jig for a variety of projects, and it has always been a valuable tool. It is a relatively inexpensive investment, and it can save you a lot of time and frustration. If you are a woodworker who works with thin stock, I highly recommend investing in a thin rip jig.
Here are some of the benefits of using a thin rip jig for your table saw:
- Increased accuracy: A thin rip jig helps to ensure that your cuts are made at a consistent width. This is important for projects where the pieces need to be the same size.
- Prevents workpiece from slipping: A thin rip jig helps to prevent the workpiece from slipping while it is being cut. This can be a problem with thin stock, which can be easily grabbed by the saw blade and thrown out of the way.
- Protects saw blade from damage: A thin rip jig helps to protect the saw blade from damage. When a thin piece of stock is passed through the saw blade, it can cause the blade to wander, which can damage the teeth. The jig helps to keep the stock in place and prevents the blade from wandering.
If you are a woodworker who works with thin stock, I highly recommend investing in a thin rip jig. It is a relatively inexpensive investment, and it can save you a lot of time and frustration.
My Buying Guides on ‘Thin Rip Jig For Table Saws’
What is a Thin Rip Jig?
A thin rip jig is a table saw accessory that allows you to make thin, precise cuts. It is typically made of a thin piece of plywood or MDF, with a guide fence attached to the front. The guide fence helps to keep your workpiece aligned as you make the cut, and the thin material of the jig prevents the blade from binding.
Why do you need a Thin Rip Jig?
There are a few reasons why you might need a thin rip jig. First, it can help you make very precise cuts. This is especially important if you are cutting small pieces of wood or if you need to make a cut that is very close to the edge of the board. Second, a thin rip jig can help you prevent the blade from binding. This can be a problem when cutting thin pieces of wood, as the blade can easily catch on the edge of the board and cause the cut to go off course. Finally, a thin rip jig can help you save time. By using a jig, you can make multiple cuts in a row without having to re-align the workpiece each time.
What to look for when buying a Thin Rip Jig
There are a few things to look for when buying a thin rip jig. First, consider the size of the jig. You will need to make sure that the jig is large enough to accommodate the size of the workpieces that you will be cutting. Second, consider the material of the jig. The jig should be made of a material that is strong enough to withstand the force of the saw blade, but also thin enough to allow the blade to pass through easily. Third, consider the features of the jig. Some jigs come with features such as a built-in miter gauge or a fence adjustment system. These features can be helpful, but they are not essential.
Tips for using a Thin Rip Jig
Here are a few tips for using a thin rip jig:
- Make sure the jig is securely attached to the table saw. The jig should be firmly attached to the table saw so that it does not move while you are making the cut.
- Align the workpiece with the guide fence. The workpiece should be aligned with the guide fence so that the cut is made in a straight line.
- Use a sharp blade. A sharp blade will help to make a clean cut and prevent the blade from binding.
- Start the cut slowly. Start the cut slowly and gradually increase the speed as the cut progresses. This will help to prevent the blade from binding.
- Keep the workpiece flat against the table saw. The workpiece should be kept flat against the table saw so that the cut is made in a straight line.
A thin rip jig is a valuable tool for any woodworker who needs to make thin, precise cuts. By following these tips, you can safely and effectively use a thin rip jig to improve your woodworking projects.
Author Profile
-
My name is Holly Bell and I have always loved to write.
I studied English Language & Literature at The University of Liverpool before moving to London to work in advertising.
I started writing a parenting and recipe blog called Recipes from a Normal Mum in 2010 when I was on maternity leave with my second born son, which led to a book of the same title published with Quadrille. The blog won a Good House Keeping Award in 2016 for best food blog. I don’t tend to update it much anymore as I’m too busy with other stuff.
Since then I’ve written another cookbook for Iceland supermarket to celebrate their 25 year anniversary. I also worked on a non fiction book without any recipes. It was published in Spring of 2021. I have appeared in various QVC, High Street TV and done shows on BBC Radio.
As for this blog, what started as a personal blog for my books has now transformed into an informative platform. Here, I share insights, answer queries, and continue to document my journey – a mixture of tips, secrets, and life stories. This blog has become a space for connection, learning, and sharing.
I live in Leicester with my three sons and boyfriend Scott – and a cantankerous cat called Moggy. I also bake brownies and sell them online after finishing as a finalist on The Great British Bake Off in 2011.
Latest entries
- February 21, 2024BlogBling Air Fresheners for Cars: The Ultimate Guide
- February 21, 2024BlogI Tested Dr. Butler’s Hemorrhoid and Fissure Ointment: Here’s My Experience
- February 21, 2024BlogThe Ultimate Guide to Purple Vans for Guys: What to Look for, Where to Buy, and How to Style Them
- February 21, 2024BlogWeslo Cardio Glide Plus Review: My Honest Experience