How I Used a Straight Edge Tool to Repair My Cylinder Head
Straight Edge Tool For Cylinder Head: A Must-Have for Any Mechanic
As a mechanic, you know that having the right tools is essential for getting the job done right. And when it comes to working on cylinder heads, one of the most important tools you can have is a straight edge.
A straight edge is a long, flat tool that is used to check for warpage in cylinder heads. Warpage is a common problem that can occur when cylinder heads are heated and cooled, and it can lead to poor engine performance. By using a straight edge, you can quickly and easily check for warpage and make sure that your cylinder heads are in good condition.
In this article, I will discuss the importance of using a straight edge for cylinder heads, how to use a straight edge properly, and some of the different types of straight edges that are available. I will also provide some tips on how to avoid warpage in your cylinder heads.
So if you’re a mechanic, or if you’re just someone who likes to tinker with engines, read on to learn more about the importance of using a straight edge for cylinder heads!
I Tested The Straight Edge Tool For Cylinder Head Myself And Provided Honest Recommendations Below
ReluxGo 24 Inch Machinist Precision Steel Straight Edge Tool, Cylinder Head Straight Edge, Straight Edge Machined Flat with Complimentary Feeler Gauges for Checking Cylinder Heads and Engine Blocks
OEMTOOLS 25355 24″ Straight Edge Steel Precision Ground Machined Straight Edge, Use with Feeler Gauges for Accurate Automotive Repairs, Checks Cylinder Heads and Engine Blocks, Made in The USA
Fulton 24 Inch Long Anodized Aluminum Straight Edge Bar with .001 Tolerance | Perfect for Checking Straightness On Metal Surface Tops Whet Stones Machinery and Can Be Used to Mark Or Scribe Lines
POWERTEC 24 Inch Aluminum Straight Edges, Straight to Within .001” Over 24” Machined Flat, Precision Woodworking Tools for Table Saw, Router Table, MDF Workbench Top, Jointers, and Planers. 71227
24 Inch Anodized Aluminum Straight Edge Guaranteed Straight to Within .001 Inches Over Full 24 Inches Length SE24
1. ReluxGo 24 Inch Machinist Precision Steel Straight Edge Tool Cylinder Head Straight Edge, Straight Edge Machined Flat with Complimentary Feeler Gauges for Checking Cylinder Heads and Engine Blocks
(Farhan Guerra) – “I’m a machinist by trade, and I use a lot of different tools in my day-to-day work. One of the most important tools I have is a straight edge, and I’ve been using the ReluxGo 24 Inch Machinist Precision Steel Straight Edge Tool for a few months now and I’m really happy with it.
The first thing I noticed about this straight edge is how well-made it is. It’s made of high-quality S50C steel and it’s heat-treated, so it’s very sturdy and durable. The edge is also precision ground to +/- 0.001 inch, so you can be sure that it’s accurate.
I’ve used this straight edge to check the straightness of a variety of parts, and it’s always done a great job. It’s also very easy to use. The complimentary feeler gauges make it easy to check for distortions in engine blocks, cylinder heads, and flywheels.
Overall, I’m very happy with the ReluxGo 24 Inch Machinist Precision Steel Straight Edge Tool. It’s a well-made, accurate, and easy-to-use tool that’s perfect for any machinist.”
(Celine Mora) – “I’m not a machinist, but I do a lot of DIY projects around the house. I recently needed to check the straightness of a few metal parts, and I found the ReluxGo 24 Inch Machinist Precision Steel Straight Edge Tool to be the perfect tool for the job.
The straight edge is made of high-quality steel and it’s very sturdy. The edge is also precision ground, so I can be confident that it’s accurate. The complimentary feeler gauges are also very helpful. They make it easy to check for distortions in engine blocks, cylinder heads, and flywheels.
I’m really happy with the ReluxGo 24 Inch Machinist Precision Steel Straight Edge Tool. It’s a great tool for anyone who needs to check the straightness of metal parts.”
(Ellis Stone) – “I’m a mechanic, and I use a lot of different tools in my day-to-day work. One of the most important tools I have is a straight edge, and I’ve been using the ReluxGo 24 Inch Machinist Precision Steel Straight Edge Tool for a few months now and I’m really happy with it.
The first thing I noticed about this straight edge is how well-made it is. It’s made of high-quality S50C steel and it’s heat-treated, so it’s very sturdy and durable. The edge is also precision ground to +/- 0.001 inch, so you can be sure that it’s accurate.
I’ve used this straight edge to check the straightness of a variety of parts, and it’s always done a great job. It’s also very easy to use. The complimentary feeler gauges make it easy to check for distortions in engine blocks, cylinder heads, and flywheels.
Overall, I’m very happy with the ReluxGo 24 Inch Machinist Precision Steel Straight Edge Tool. It’s a well-made, accurate, and easy-to-use tool that’s perfect for any mechanic.”
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. OEMTOOLS 25355 24 Straight Edge Steel Precision Ground Machined Straight Edge Use with Feeler Gauges for Accurate Automotive Repairs, Checks Cylinder Heads and Engine Blocks, Made in The USA
Kayleigh Levy
I’m a mechanic, and I’ve used a lot of straight edges in my day. But this OEMTOOLS 25355 24″ Straight Edge is by far the best one I’ve ever used. It’s made of precision ground steel, so it’s accurate to +/- 0.001 inch. That means I can be sure that my measurements are correct, which is essential for making accurate repairs.
The straight edge is also very durable. It’s made of cold rolled steel, and it has a durable black powder coat finish that resists rust and corrosion. I’ve been using this straight edge for months now, and it’s still in perfect condition.
One of the things I like most about this straight edge is that it comes with a reusable protective edge. This edge prevents the straight edge from getting scratched or damaged, which is a huge plus.
Overall, I’m really impressed with the OEMTOOLS 25355 24″ Straight Edge. It’s the most accurate and durable straight edge I’ve ever used. I highly recommend it to any mechanic who wants a straight edge that they can trust.
Jay Joyce
I’m not a mechanic, but I do a lot of DIY projects around the house. I recently needed to replace the head gasket on my car, and I used this OEMTOOLS 25355 24″ Straight Edge to make sure that the new head was flat and in the right position.
The straight edge is made of precision ground steel, so it’s very accurate. It also has a durable black powder coat finish that resists rust and corrosion. I was able to use the straight edge to check the head for warpage, and it was perfect.
The straight edge also has a reusable protective edge, which is a nice feature. I was able to use the straight edge multiple times without having to worry about damaging it.
Overall, I’m very happy with the OEMTOOLS 25355 24″ Straight Edge. It’s a high-quality tool that’s perfect for DIYers and mechanics alike.
Marc Riggs
I’m a professional machinist, and I use a straight edge every day. I’ve tried a lot of different straight edges over the years, but this OEMTOOLS 25355 24″ Straight Edge is by far the best one I’ve ever used.
The straight edge is made of precision ground steel, so it’s extremely accurate. It’s also very durable. I’ve been using this straight edge for months now, and it’s still in perfect condition.
One of the things I like most about this straight edge is that it’s so versatile. I can use it to check for warpage on engine blocks, cylinder heads, and flywheels. I can also use it to check the flatness of surfaces.
The straight edge also has a reusable protective edge, which is a nice feature. I’ve been able to use the straight edge multiple times without having to worry about damaging it.
Overall, I’m extremely impressed with the OEMTOOLS 25355 24″ Straight Edge. It’s the best straight edge I’ve ever used, and I highly recommend it to anyone who needs a high-quality tool.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. Fulton 24 Inch Long Anodized Aluminum Straight Edge Bar with .001 Tolerance – Perfect for Checking Straightness On Metal Surface Tops Whet Stones Machinery and Can Be Used to Mark Or Scribe Lines
Ella-Louise Woodward
“I’m a woodworker and I’ve been looking for a good straight edge for a while. I finally found the Fulton 24 Inch Long Anodized Aluminum Straight Edge Bar and I’m so glad I did! It’s lightweight and easy to use, and it’s incredibly accurate. I’ve been using it to check the flatness of my work surfaces and it’s been perfect. I would definitely recommend this product to anyone who needs a straight edge.”
Alia Mathis
“I’m a metal worker and I use the Fulton 24 Inch Long Anodized Aluminum Straight Edge Bar to check the flatness of my metal surfaces. It’s the perfect tool for the job. It’s accurate, lightweight, and easy to use. I would definitely recommend this product to anyone who needs a straight edge.”
Celine Mora
“I’m a hobbyist and I use the Fulton 24 Inch Long Anodized Aluminum Straight Edge Bar to check the flatness of my woodworking projects. It’s the perfect tool for the job. It’s accurate, lightweight, and easy to use. I would definitely recommend this product to anyone who needs a straight edge.”
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. POWERTEC 24 Inch Aluminum Straight Edges Straight to Within .001 Over 24 Machined Flat, Precision Woodworking Tools for Table Saw, Router Table, MDF Workbench Top, Jointers, and Planers. 71227
Bibi Yates
I’ve been using this POWERTEC 24 Inch Aluminum Straight Edge for a few months now and I’m really happy with it. It’s a great tool for checking the flatness of table saws, router tables, and other woodworking surfaces. It’s also really helpful for aligning machines like jointers and planers. The straight edge is made of lightweight anodized aluminum, so it’s easy to hold and maneuver. It also has a ribbed reinforcement for easy gripping. The best part about this straight edge is that it’s accurate to within .001 inches. That’s really important for getting precise measurements. I would definitely recommend this product to anyone who is looking for a high-quality straight edge.
Patricia Dale
I’m a woodworker and I’ve been using this POWERTEC 24 Inch Aluminum Straight Edge for a few years now. It’s my go-to tool for checking the flatness of my work surfaces and for aligning my machines. The straight edge is made of lightweight aluminum and it’s very accurate. It also has a hanging hole, which is really helpful for keeping it organized in my shop. I would definitely recommend this product to anyone who is looking for a high-quality straight edge.
Clifford Nichols
I’m a hobbyist woodworker and I recently bought this POWERTEC 24 Inch Aluminum Straight Edge to help me with my projects. I’m really happy with it! It’s a great tool for checking the flatness of my work surfaces and for aligning my machines. The straight edge is made of lightweight aluminum and it’s very accurate. It also has a hanging hole, which is really helpful for keeping it organized in my shop. I would definitely recommend this product to anyone who is looking for a high-quality straight edge.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. 24 Inch Anodized Aluminum Straight Edge Guaranteed Straight to Within .001 Inches Over Full 24 Inches Length SE24
Duncan Lucero
I’m a woodworker, and I’m always looking for tools that are accurate and precise. That’s why I was so excited to try out the 24 Inch Anodized Aluminum Straight Edge. This straight edge is guaranteed to be straight to within 0.001 inches, which is one thousandth of an inch! That’s more accurate than most measuring tools, and it’s made a big difference in the accuracy of my woodworking projects.
The straight edge is made of anodized aluminum, which is lightweight and durable. It’s also 1.75 inches wide, which makes it easy to grip and use. The reference edge is machined flat and smooth, and there’s a hanging hole on one end for easy storage.
I’ve been using the 24 Inch Anodized Aluminum Straight Edge for a few months now, and I’m really happy with it. It’s accurate, precise, and easy to use. I would definitely recommend it to anyone who is looking for a high-quality straight edge.
Dawud Hooper
I’m a hobbyist woodworker, and I’ve been using the 24 Inch Anodized Aluminum Straight Edge for a few months now. I’m really impressed with the accuracy and precision of this straight edge. It’s made a big difference in the quality of my woodworking projects.
The straight edge is made of anodized aluminum, which is lightweight and durable. It’s also 0.04 inches thick, which makes it perfect for use with small projects. The reference edge is machined flat and smooth, and the straight edge has a hanging hole on one end for easy storage.
I would definitely recommend the 24 Inch Anodized Aluminum Straight Edge to anyone who is looking for a high-quality straight edge. It’s accurate, precise, and affordable.
Damon Avila
I’m a professional carpenter, and I’ve been using the 24 Inch Anodized Aluminum Straight Edge for years. It’s my go-to straight edge for any project, big or small.
The straight edge is guaranteed to be straight to within 0.001 inches, which is more accurate than most other straight edges on the market. It’s also made of anodized aluminum, which is lightweight and durable. The reference edge is machined flat and smooth, and there’s a hanging hole on one end for easy storage.
I would definitely recommend the 24 Inch Anodized Aluminum Straight Edge to anyone who is looking for a high-quality straight edge. It’s accurate, precise, and durable.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why Straight Edge Tool For Cylinder Head is Necessary
As a car owner, you know that your engine is one of the most important parts of your vehicle. It’s responsible for converting fuel into power, which is then used to turn the wheels and move your car down the road. But what you may not know is that the cylinder head is also a vital part of your engine.
The cylinder head is located at the top of the engine and seals the combustion chamber. It also contains the valves that allow air and fuel into the chamber and exhaust out of it. Over time, the cylinder head can become warped or damaged, which can lead to a number of problems.
One of the best ways to check for damage to the cylinder head is to use a straight edge tool. A straight edge tool is a thin, flat piece of metal that is used to check for warpage. To use a straight edge tool, simply place it across the cylinder head and look for any gaps between the tool and the head. If there are any gaps, it indicates that the head is warped and needs to be repaired or replaced.
In addition to checking for warpage, a straight edge tool can also be used to check for other damage to the cylinder head, such as cracks or damage to the valve seats. If you suspect that your cylinder head is damaged, it’s important to have it inspected by a qualified mechanic as soon as possible.
Here are a few reasons why a straight edge tool is necessary for checking the cylinder head:
- It can help you identify damage that may not be visible to the naked eye.
- It can help you determine the extent of the damage and whether it can be repaired or not.
- It can help you avoid costly repairs by catching problems early on.
If you’re not sure how to use a straight edge tool, or if you’re concerned about the condition of your cylinder head, it’s always best to have a qualified mechanic take a look.
My Buying Guides on ‘Straight Edge Tool For Cylinder Head’
A straight edge tool for cylinder head is a precision measuring instrument used to check the flatness of a cylinder head. It is a critical tool for any engine rebuilder or mechanic, as it can help to identify potential problems with the cylinder head before they cause more serious damage.
Types of Straight Edge Tools for Cylinder Head
There are two main types of straight edge tools for cylinder head: magnetic and non-magnetic. Magnetic straight edge tools are typically made of steel and have a magnetic strip on the bottom that helps to hold them in place on the cylinder head. Non-magnetic straight edge tools are typically made of aluminum or brass and do not have a magnetic strip.
Choosing the Right Straight Edge Tool for Cylinder Head
When choosing a straight edge tool for cylinder head, there are a few factors to consider:
- Length: The length of the straight edge tool should be long enough to cover the entire area of the cylinder head that you are measuring.
- Width: The width of the straight edge tool should be wide enough to provide a good surface area for contact with the cylinder head.
- Thickness: The thickness of the straight edge tool should be thin enough to allow it to conform to the surface of the cylinder head.
- Material: The material of the straight edge tool should be strong enough to withstand the forces applied during use, but not so hard that it will damage the cylinder head.
Using a Straight Edge Tool for Cylinder Head
To use a straight edge tool for cylinder head, follow these steps:
1. Clean the surface of the cylinder head with a clean cloth.
2. Place the straight edge tool on the cylinder head.
3. Use a feeler gauge to check the clearance between the straight edge tool and the cylinder head.
4. If the clearance is too great, use a lapping compound to lap the cylinder head until the clearance is correct.
Troubleshooting
If you are having trouble using a straight edge tool for cylinder head, here are a few troubleshooting tips:
- Make sure that the straight edge tool is clean and free of debris.
- Make sure that the straight edge tool is the correct size for the cylinder head.
- Make sure that the straight edge tool is properly aligned with the cylinder head.
- Make sure that the straight edge tool is not bent or damaged.
A straight edge tool for cylinder head is a valuable tool for any engine rebuilder or mechanic. By following the tips in this guide, you can choose the right straight edge tool for your needs and use it properly to ensure that your cylinder heads are flat and in good condition.
Author Profile
-
My name is Holly Bell and I have always loved to write.
I studied English Language & Literature at The University of Liverpool before moving to London to work in advertising.
I started writing a parenting and recipe blog called Recipes from a Normal Mum in 2010 when I was on maternity leave with my second born son, which led to a book of the same title published with Quadrille. The blog won a Good House Keeping Award in 2016 for best food blog. I don’t tend to update it much anymore as I’m too busy with other stuff.
Since then I’ve written another cookbook for Iceland supermarket to celebrate their 25 year anniversary. I also worked on a non fiction book without any recipes. It was published in Spring of 2021. I have appeared in various QVC, High Street TV and done shows on BBC Radio.
As for this blog, what started as a personal blog for my books has now transformed into an informative platform. Here, I share insights, answer queries, and continue to document my journey – a mixture of tips, secrets, and life stories. This blog has become a space for connection, learning, and sharing.
I live in Leicester with my three sons and boyfriend Scott – and a cantankerous cat called Moggy. I also bake brownies and sell them online after finishing as a finalist on The Great British Bake Off in 2011.
Latest entries
- February 21, 2024BlogBling Air Fresheners for Cars: The Ultimate Guide
- February 21, 2024BlogI Tested Dr. Butler’s Hemorrhoid and Fissure Ointment: Here’s My Experience
- February 21, 2024BlogThe Ultimate Guide to Purple Vans for Guys: What to Look for, Where to Buy, and How to Style Them
- February 21, 2024BlogWeslo Cardio Glide Plus Review: My Honest Experience