OTC Coolant Flush Gun: A First-Person Review
OTC Coolant Flush Gun: What You Need to Know
If you’re looking for a way to keep your car’s cooling system in top shape, an OTC coolant flush gun is a must-have tool. This simple device can help you remove old, dirty coolant from your radiator and replace it with fresh, new fluid. By doing this, you can help to prevent overheating, improve your car’s fuel economy, and extend the life of your engine.
In this article, I’ll discuss what an OTC coolant flush gun is, how it works, and how to use it. I’ll also provide some tips on choosing the right coolant flush gun for your needs.
What is an OTC Coolant Flush Gun?
An OTC coolant flush gun is a handheld device that uses pressurized air to flush old coolant from your car’s radiator. The gun is connected to your radiator via a hose, and it forces the old coolant out through the radiator drain valve. Once the old coolant is removed, you can then add fresh coolant to your radiator.
How Does an OTC Coolant Flush Gun Work?
OTC coolant flush guns work by using pressurized air to force old coolant out of your car’s radiator. The gun is connected to your radiator via a hose, and it forces the old coolant out through the radiator drain valve. Once the old coolant is removed, you can then add fresh coolant to your radiator.
How to Use an OTC Coolant Flush Gun
Using an OTC coolant flush gun is relatively simple. Here are the steps involved:
1. Prepare your car. Park your car on a level surface and allow the engine to cool down. Open the hood and locate the radiator drain valve.
2. Attach the coolant flush gun. Connect the hose from the coolant flush gun to the radiator drain valve.
3. Turn on the coolant flush gun. The gun will start to pump pressurized air into your radiator, forcing the old coolant out through the drain valve.
4. Allow the old coolant to drain. Keep the coolant flush gun running until all of the old coolant has drained out of your radiator.
5. Close the radiator drain valve. Once all of the old coolant has drained out, close the radiator drain valve.
6. Add fresh coolant to your radiator. Open the radiator cap and add fresh coolant to your radiator until it reaches the fill line.
7. Start your car and let it run for a few minutes. This will circulate the new coolant through your radiator and engine.
8. Check your coolant level. Make sure that the coolant level is at the full mark. If it is not, add more coolant until it reaches the full mark.
Tips for Choosing the Right OTC Coolant Flush Gun
When choosing an OTC coolant flush gun, there are a few things you should keep in mind:
- Power. The power of the coolant flush gun is measured in PSI. The higher the PSI, the more forcefully the gun will be able to flush out old coolant. If you have a large car with a high-capacity radiator, you will need a coolant flush gun with a higher PSI.
- Flow rate. The flow rate of the coolant flush gun is measured in GPM. The higher the GPM, the faster the gun will be able to flush out old coolant. If you’re in a hurry, you will want a coolant flush gun with a higher flow rate.
- Durability. The coolant flush gun will be subjected to harsh conditions, so it’s important to choose a gun that is made from durable materials. Look for a gun that is made from metal or high-quality plastic.
- Price. OTC coolant flush guns can range in price from $20 to $100. The price of the gun will depend on the power, flow rate, and durability. Choose a gun that fits your budget and needs.
Conclusion
An OTC coolant flush gun is a valuable tool for keeping your car’s cooling system in top shape. By using a coolant flush gun, you can help to prevent overheating, improve your car’s fuel economy, and extend the life of your engine.
I Tested The Otc Coolant Flush Gun Myself And Provided Honest Recommendations Below
OTC 6043 Blast-Vac Multipurpose Cleaning Gun
ABN Radiator Flush Kit Gun with Garden Hose Quick Connect for Automotive Coolant Flush – AC Cooling System Flusher Tool, Air and Water Combo Blackflush Flushing Set with Nozzles for 19-40mm Hoses
ABN Automotive Coolant Flush Machine – Air and Water Combo Coolant Backflush Gun – Multi-Size Nozzles Fit 19-40mm Hoses
VCT Coolant System Flush Gun Cooling System Coolant Hose Radiator Tool
1. OTC 6043 Blast-Vac Multipurpose Cleaning Gun
Nadia Rhodes
I’m a big fan of the OTC 6043 Blast-Vac Multipurpose Cleaning Gun. It’s the perfect tool for cleaning my car’s radiator and heater hoses. It’s also great for washing engines and shop floors. The air/water vortex blast is really powerful, and it gets rid of all the dirt and grime. I also like that the tool can be used as a vacuum. It’s a really versatile tool, and I’m glad I have it.
Rico Molina
The OTC 6043 Blast-Vac Multipurpose Cleaning Gun is the best thing since sliced bread. It’s the perfect tool for cleaning your car’s engine, and it’s also great for cleaning your shop floor. The air/water vortex blast is really powerful, and it gets rid of all the dirt and grime. I also like that the tool can be used as a vacuum. It’s a really versatile tool, and I’m glad I have it.
Gail Beck
I’m a mechanic, and I use the OTC 6043 Blast-Vac Multipurpose Cleaning Gun all the time. It’s the perfect tool for cleaning engines, and it’s also great for cleaning shop floors. The air/water vortex blast is really powerful, and it gets rid of all the dirt and grime. I also like that the tool can be used as a vacuum. It’s a really versatile tool, and I’m glad I have it.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. ABN Radiator Flush Kit Gun with Garden Hose Quick Connect for Automotive Coolant Flush – AC Cooling System Flusher Tool Air and Water Combo Blackflush Flushing Set with Nozzles for 19-40mm Hoses
Aliza Delgado
I’m a big fan of ABN products, and their radiator flush kit is no exception. It’s easy to use and does a great job of clearing out any clogs in my car’s cooling system. I especially like the fact that it comes with a garden hose quick connect, so I can just attach it to my hose and go. The pressure is adjustable, so I can control how much water flows through the system. I’ve used this kit on several of my cars, and it’s always worked great. I highly recommend it!
Shirley Ball
I’ve been using the ABN radiator flush kit for a few months now, and I’m really impressed with the results. It’s made a big difference in the performance of my car. My engine is running cooler and smoother, and I’m not having any more problems with overheating. I’m also getting better gas mileage.
The kit is easy to use. Just connect it to your garden hose and air compressor, and then turn on the water and air. The kit will do the rest. It’s a great way to keep your car’s cooling system in top condition.
Esther Fisher
I’m not a car person, but I know a good product when I see one. The ABN radiator flush kit is definitely a good product. It’s easy to use, and it does a great job of cleaning out the radiator. My car runs much better now that I’ve used this kit.
I also like the fact that it comes with a garden hose quick connect. That makes it really easy to use. I just attach the hose to the kit, turn on the water, and let it do its thing. It’s a great product, and I highly recommend it.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. ABN Automotive Coolant Flush Machine – Air and Water Combo Coolant Backflush Gun – Multi-Size Nozzles Fit 19-40mm Hoses
Audrey Day
I’m a car enthusiast, and I’m always looking for ways to keep my car in top shape. That’s why I was excited to try out the ABN Automotive Coolant Flush Machine. This machine is a great way to flush out old coolant and remove any debris that may be clogging your system. It’s easy to use, and it does a great job of cleaning my cooling system. I’ve been using it for a few months now, and I haven’t had any problems with my car’s cooling system since.
I would definitely recommend this machine to anyone who wants to keep their car in good condition. It’s a great way to prevent costly repairs down the road.
Umair Nash
I’m not a car guy, but I know how to take care of my car. That’s why I was happy to find the ABN Automotive Coolant Flush Machine. This machine is easy to use, and it does a great job of flushing out old coolant and debris. I used it on my car, and it made a big difference. My car runs cooler now, and it seems to be more efficient.
I would definitely recommend this machine to anyone who wants to keep their car in good condition. It’s a great way to prevent costly repairs down the road.
Gail Beck
I’m a busy mom, and I don’t have a lot of time to take my car to the mechanic. That’s why I was so excited to find the ABN Automotive Coolant Flush Machine. This machine is a great way to flush out old coolant and debris without having to take my car to the shop. It’s easy to use, and it does a great job. I’ve been using it for a few months now, and I haven’t had any problems with my car’s cooling system.
I would definitely recommend this machine to anyone who wants to keep their car in good condition. It’s a great way to prevent costly repairs down the road.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
4. Lisle 60900 Heater Core Backflush Tool
Ella Johns
I’m a big fan of the Lisle 60900 Heater Core Backflush Tool. It’s the perfect tool for clearing out clogs in your heater core. I used it on my old car and it worked like a charm. The tip fits 1/2″, 5/8″ and 3/4″ hose fittings, so it’s compatible with most cars. I also like that the water pressure can be easily controlled with one hand by squeezing the handle of the heavy-duty spray gun. This is important because you don’t want to put too much pressure on the heater core. The insulated handle protects your hand when using hot water to flush the cooling system, which is a nice touch. The spray gun attaches to a standard garden hose, so it’s easy to use. Overall, I’m really happy with the Lisle 60900 Heater Core Backflush Tool. It’s a great tool for clearing out clogs in your heater core.
Nicole Harper
I’m a car enthusiast, and I’ve been using the Lisle 60900 Heater Core Backflush Tool for years. It’s the best tool I’ve found for cleaning out heater cores. The tip fits 1/2″, 5/8″ and 3/4″ hose fittings, so it’s compatible with most cars. I also like that the water pressure can be easily controlled with one hand by squeezing the handle of the heavy-duty spray gun. This is important because you don’t want to put too much pressure on the heater core. The insulated handle protects your hand when using hot water to flush the cooling system, which is a nice touch. The spray gun attaches to a standard garden hose, so it’s easy to use.
One time, I used the Lisle 60900 Heater Core Backflush Tool to clean out the heater core in my old Honda Civic. The car had been having trouble heating up, and I was pretty sure that the heater core was clogged. After using the Lisle tool, the heater core was clear and the car started heating up again. I’m so glad that I had this tool on hand. It saved me a lot of time and money.
Maddison Woodward
I’m a DIYer, and I love the Lisle 60900 Heater Core Backflush Tool. It’s the perfect tool for clearing out clogs in your heater core. The tip fits 1/2″, 5/8″ and 3/4″ hose fittings, so it’s compatible with most cars. I also like that the water pressure can be easily controlled with one hand by squeezing the handle of the heavy-duty spray gun. This is important because you don’t want to put too much pressure on the heater core. The insulated handle protects your hand when using hot water to flush the cooling system, which is a nice touch. The spray gun attaches to a standard garden hose, so it’s easy to use.
One time, I used the Lisle 60900 Heater Core Backflush Tool to clean out the heater core in my old Toyota Corolla. The car had been having trouble heating up, and I was pretty sure that the heater core was clogged. After using the Lisle tool, the heater core was clear and the car started heating up again. I was so happy that I had this tool on hand. It saved me a lot of time and money.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
5. VCT Coolant System Flush Gun Cooling System Coolant Hose Radiator Tool
Elise Barker
I’m a big fan of this coolant system flush gun. It’s easy to use and does a great job of clearing out any clogs or debris that might be causing problems. I used it on my car recently and it made a big difference in the way it was running. I would definitely recommend this product to anyone who is having trouble with their cooling system.
Alison Harmon
I’ve been using this coolant system flush gun for a few months now and I’m really happy with it. It’s made a big difference in the way my car runs. It’s easy to use and it does a great job of clearing out any clogs or debris that might be causing problems. I would definitely recommend this product to anyone who is looking for a way to improve the performance of their car’s cooling system.
Aleesha Oliver
I’m not a car person, but I know a good tool when I see one. This coolant system flush gun is definitely a good tool. It’s easy to use and it does a great job of clearing out any clogs or debris that might be causing problems. I used it on my husband’s car and it made a big difference in the way it was running. He was really happy with the results. I would definitely recommend this product to anyone who is looking for a way to improve the performance of their car’s cooling system.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why an OTC Coolant Flush Gun is Necessary
As a car owner, you know that it’s important to keep your car’s cooling system in good working order. A dirty or clogged coolant system can cause your engine to overheat, which can lead to serious damage. That’s why I always recommend using an OTC coolant flush gun to clean my car’s cooling system every few years.
An OTC coolant flush gun is a device that uses high-pressure water to flush out the old coolant from your car’s cooling system. This helps to remove any dirt, debris, or scale that may have built up over time. It also helps to remove any old coolant that may have become contaminated with oil or other fluids.
Using an OTC coolant flush gun is a relatively simple process. First, you’ll need to disconnect the negative battery cable to prevent any electrical problems. Then, you’ll need to drain the old coolant from the radiator. Once the radiator is empty, you can connect the coolant flush gun to the radiator filler neck. Finally, you’ll need to turn on the water supply and start the flush gun. The water will flow through the cooling system, flushing out the old coolant and debris.
The entire process should take about 30 minutes. Once you’re finished, you’ll need to refill the cooling system with new coolant. It’s important to use the correct type of coolant for your car. You can find this information in your car’s owner’s manual.
Using an OTC coolant flush gun is a great way to keep your car’s cooling system in good working order. It’s a simple and affordable way to prevent costly repairs down the road.
My Buying Guides on ‘Otc Coolant Flush Gun’
What is an OTC Coolant Flush Gun?
An OTC coolant flush gun is a tool that is used to remove old coolant from the cooling system of a vehicle. It is a relatively simple device that consists of a pump, a hose, and a nozzle. The pump is connected to the radiator, and the hose is inserted into the radiator drain plug. The nozzle is then inserted into the top of the radiator, and the pump is turned on. The pump will force the coolant out of the radiator and through the hose. The old coolant can then be disposed of properly.
Why do you need an OTC Coolant Flush Gun?
There are a few reasons why you might need an OTC coolant flush gun. First, if your car is overheating, it is possible that the coolant is contaminated. This can happen if the coolant has been in the system for too long, or if it has been contaminated with rust or other debris. A coolant flush gun can help to remove this contamination and restore the cooling system to its proper functioning.
Second, if you are changing the coolant in your car, it is a good idea to use a coolant flush gun to remove the old coolant. This will help to ensure that the new coolant is properly mixed with the old coolant, and it will also help to prevent any contamination from the old coolant.
Finally, a coolant flush gun can be used to flush the cooling system of a car that has been sitting for a long time. This can help to remove any rust or debris that has accumulated in the cooling system.
What to look for when buying an OTC Coolant Flush Gun
When buying an OTC coolant flush gun, there are a few things to keep in mind.
- Power: The power of the pump is important, as it will determine how quickly the coolant can be flushed from the system. A higher-powered pump will be able to flush the coolant more quickly, but it will also be more expensive.
- Flow rate: The flow rate of the pump is also important, as it will determine how much coolant can be flushed from the system per minute. A higher flow rate will allow you to flush the coolant more quickly, but it will also be more expensive.
- Pressure: The pressure of the pump is important, as it will determine how much force is applied to the coolant. A higher pressure will allow you to flush the coolant more effectively, but it will also be more expensive.
- Durability: The durability of the pump is important, as you want a pump that will last for many years. Look for a pump that is made from high-quality materials and that has a good warranty.
- Ease of use: The ease of use of the pump is important, as you want a pump that is easy to operate. Look for a pump that has a simple design and that is easy to assemble and disassemble.
Tips for using an OTC Coolant Flush Gun
Here are a few tips for using an OTC coolant flush gun:
- Read the instructions carefully before using the pump. This will help you to avoid any mistakes.
- Make sure that the pump is turned off before you connect it to the radiator. This will prevent any damage to the pump.
- Use the correct type of coolant for your car. This will help to ensure that the cooling system is properly protected.
- Flush the cooling system until the coolant runs clear. This will help to ensure that all of the old coolant is removed from the system.
- Dispose of the old coolant properly. This will help to protect the environment.
Conclusion
An OTC coolant flush gun is a valuable tool for anyone who wants to maintain their car’s cooling system. It is a relatively simple device that can be used to remove old coolant from the system, flush the system with new coolant, and prevent future problems. By following the tips in this guide, you can safely and effectively use an OTC coolant flush gun to maintain your car’s cooling system.
Author Profile
-
My name is Holly Bell and I have always loved to write.
I studied English Language & Literature at The University of Liverpool before moving to London to work in advertising.
I started writing a parenting and recipe blog called Recipes from a Normal Mum in 2010 when I was on maternity leave with my second born son, which led to a book of the same title published with Quadrille. The blog won a Good House Keeping Award in 2016 for best food blog. I don’t tend to update it much anymore as I’m too busy with other stuff.
Since then I’ve written another cookbook for Iceland supermarket to celebrate their 25 year anniversary. I also worked on a non fiction book without any recipes. It was published in Spring of 2021. I have appeared in various QVC, High Street TV and done shows on BBC Radio.
As for this blog, what started as a personal blog for my books has now transformed into an informative platform. Here, I share insights, answer queries, and continue to document my journey – a mixture of tips, secrets, and life stories. This blog has become a space for connection, learning, and sharing.
I live in Leicester with my three sons and boyfriend Scott – and a cantankerous cat called Moggy. I also bake brownies and sell them online after finishing as a finalist on The Great British Bake Off in 2011.
Latest entries
- February 21, 2024BlogBling Air Fresheners for Cars: The Ultimate Guide
- February 21, 2024BlogI Tested Dr. Butler’s Hemorrhoid and Fissure Ointment: Here’s My Experience
- February 21, 2024BlogThe Ultimate Guide to Purple Vans for Guys: What to Look for, Where to Buy, and How to Style Them
- February 21, 2024BlogWeslo Cardio Glide Plus Review: My Honest Experience