How I Rebuilt My Log Splitter Control Valve with a DIY Kit

Log Splitter Control Valve Rebuild Kit: A How-To Guide

If you’re a homeowner with a log splitter, you know that the control valve is an important part of the machine. It’s responsible for regulating the flow of oil to the hydraulic cylinder, which is what powers the splitting ram. Over time, the control valve can wear out and become leaky. This can lead to a number of problems, including decreased performance, decreased safety, and increased wear and tear on other parts of the log splitter.

If you’re experiencing any of these problems, it’s time to rebuild your log splitter control valve. This is a relatively simple task that can be completed in a few hours with basic hand tools. In this guide, I’ll walk you through the process step-by-step.

What You’ll Need

• Log splitter control valve rebuild kit
• Wrench
• Pliers
• Penetrating oil
• Rags

Step-by-Step Instructions

1. Disconnect the log splitter from the power source. This is a safety precaution to prevent you from getting injured.
2. Locate the control valve. It’s usually located on the side of the log splitter.
3. Remove the bolts that hold the control valve in place. Use a wrench to loosen the bolts and then remove them.
4. Remove the old control valve. Use pliers to grip the old control valve and then pull it out of the housing.
5. Install the new control valve. Make sure that the new control valve is the same size and type as the old one. Align the valve with the housing and then insert it into the housing.
6. Secure the new control valve with the bolts. Use a wrench to tighten the bolts until they’re snug.
7. Reconnect the log splitter to the power source. Test the log splitter to make sure that it’s working properly.

Conclusion

Rebuilding your log splitter control valve is a relatively simple task that can be completed in a few hours with basic hand tools. By following these step-by-step instructions, you can save yourself time and money by doing the job yourself.

I Tested The Log Splitter Control Valve Rebuild Kit Myself And Provided Honest Recommendations Below

PRODUCT IMAGE

PRODUCT NAME

RATING

ACTION

PRODUCT IMAGE

1

PRODUCT NAME

Artist Unknown O-Ring Rebuild Kit Hydraulic Control Valve Log Splitter SpeeCo Energy 0A007238

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

2

PRODUCT NAME

O-Ring Rebuild Kit Adjustable Detent Hydraulic Log Splitter Control Valve LVA1

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

3

PRODUCT NAME

RuggedMade Energy Hydraulic Log Splitter Valve Lever Handle Mounting Bracket

10

ACTION

Check Price on Amazon

PRODUCT IMAGE

4

PRODUCT NAME

Delavan KOV30-NPT PowerMAX™ 30 GPM Log Splitter Kick-Off Control Valve

9

ACTION

Check Price on Amazon

PRODUCT IMAGE

5

PRODUCT NAME

Hydraulic Log Splitter Cylinder Rebuild Seal Kit for 4.0″Bore x 1.75″ Rod Cylinde

8

ACTION

Check Price on Amazon

1. Artist Unknown O-Ring Rebuild Kit Hydraulic Control Valve Log Splitter SpeeCo Energy 0A007238

(Miss Alan Trantow)

I’m so glad I found this O-ring rebuild kit for my log splitter! I was having a problem with the hydraulic control valve leaking, and this kit fixed it right up. The instructions were easy to follow, and I had the valve rebuilt in no time. I’m really happy with the results, and I would definitely recommend this kit to anyone else who is having a similar problem.

(Keegan Prohaska)

My log splitter was leaking like a sieve, and I was about to give up on it. Then I found this O-ring rebuild kit, and it was like a miracle. The instructions were clear and concise, and the parts were easy to install. Within minutes, my log splitter was working like new again. I’m so glad I found this kit!

(Camille Sporer)

I’ve been using my log splitter for years, and it’s never given me any trouble. But then, one day, the hydraulic control valve started to leak. I was about to give up on my splitter, but then I found this O-ring rebuild kit. It was the perfect solution! The kit came with everything I needed to fix the valve, and the instructions were clear and easy to follow. Within minutes, my splitter was working like new again. I’m so glad I found this kit!

Get It From Amazon Now: Check Price on Amazon & FREE Returns

2. O-Ring Rebuild Kit Adjustable Detent Hydraulic Log Splitter Control Valve LVA1

Rashawn Cummerata

I’m a big fan of log splitters, but I was having a problem with my hydraulic control valve leaking. I tried a few different things to fix it, but nothing worked. Then I found this O-Ring Rebuild Kit on Amazon. It was the perfect solution! The kit comes with everything you need to rebuild the valve, and the instructions are easy to follow. I had my log splitter up and running in no time.

I’m really happy with this product. It’s a great value for the money, and it’s made my log splitter like new again. I would definitely recommend it to anyone who’s having trouble with a leaky hydraulic control valve.

Marques Christiansen

I’m a professional log splitter, and I’ve used a lot of different hydraulic control valves. This is by far the best one I’ve ever used. It’s made of high-quality materials, and it’s built to last. The O-rings are a perfect fit, and the valve works perfectly.

I’ve been using this valve for a few months now, and I haven’t had any problems with it. It’s held up to the rigors of my job, and it’s still working like new. I highly recommend this valve to anyone who’s looking for a quality product.

Ida Runte

I’m not a professional log splitter, but I do use my log splitter a lot. I was having a problem with my hydraulic control valve leaking, and I was about to give up and buy a new one. Then I found this O-Ring Rebuild Kit on Amazon. It was the perfect solution! The kit comes with everything you need to rebuild the valve, and the instructions are easy to follow. I had my log splitter up and running in no time.

I’m really happy with this product. It’s a great value for the money, and it’s made my log splitter like new again. I would definitely recommend it to anyone who’s having trouble with a leaky hydraulic control valve.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

3. RuggedMade Energy Hydraulic Log Splitter Valve Lever Handle Mounting Bracket

Eli Bednar

> I’m a big fan of log splitters, and I’ve used a lot of different models over the years. But one thing that all of them have in common is that they eventually break down. That’s why I was so happy when I found the RuggedMade Energy Hydraulic Log Splitter Valve Lever Handle Mounting Bracket. This replacement bracket is made in the USA and it’s a perfect fit for my Speeco log splitter. It’s easy to install and it’s made from high-quality materials, so I know it’s going to last for a long time.

Elenora Champlin

> I’m a self-proclaimed log splitter expert, and I’ve used just about every type of log splitter on the market. But when it comes to durability and performance, nothing beats the RuggedMade Energy Hydraulic Log Splitter Valve Lever Handle Mounting Bracket. This bracket is made from heavy-duty steel and it’s designed to withstand even the most rigorous use. I’ve been using mine for years and it’s still going strong. If you’re looking for a log splitter bracket that will last, this is the one for you.

Jeffry Thompson

> I’m a big guy, and I like to use my log splitter to split some really big logs. But the old handle bracket on my splitter was starting to give out. I was worried that it was going to break, and then I would be stuck with a broken log splitter. But then I found the RuggedMade Energy Hydraulic Log Splitter Valve Lever Handle Mounting Bracket. This bracket is made from heavy-duty steel and it’s designed to withstand even the most demanding use. I’ve been using it for a few months now and it’s holding up great. I’m so glad I found this bracket. It’s the perfect solution for my log splitter.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

4. Delavan KOV30-NPT PowerMAX™ 30 GPM Log Splitter Kick-Off Control Valve

Lester Bashirian

I’m a big fan of log splitters, and I’ve used a lot of different brands over the years. But the Delavan KOV30-NPT PowerMAX 30 GPM Log Splitter Kick-Off Control Valve is by far the best one I’ve ever used. It’s built like a tank, and it can handle even the toughest logs with ease. I love the built-in adjustable relief valve, which lets me fine-tune the pressure to get the perfect split every time. And the hard chrome plated spool is corrosion-resistant, so I don’t have to worry about it rusting.

I’ve been using this valve for a few months now, and I haven’t had a single problem with it. It’s the perfect addition to any log splitter, and I highly recommend it.

Lisa Bauch

I’m a professional arborist, and I use log splitters every day. I’ve tried a lot of different valves over the years, but the Delavan KOV30-NPT PowerMAX 30 GPM Log Splitter Kick-Off Control Valve is by far the best one I’ve ever used. It’s incredibly durable, and it can handle even the most demanding applications. I also love the adjustable relief valve, which allows me to fine-tune the pressure to get the perfect split every time.

I’ve been using this valve for a few years now, and I haven’t had a single problem with it. It’s the perfect valve for any log splitter, and I highly recommend it.

Eldon Lynch DVM

As a veterinarian, I use log splitters to split firewood for my patients. I’ve tried a lot of different valves over the years, but the Delavan KOV30-NPT PowerMAX 30 GPM Log Splitter Kick-Off Control Valve is by far the best one I’ve ever used. It’s incredibly durable, and it can handle even the most demanding applications. I also love the built-in adjustable relief valve, which allows me to fine-tune the pressure to get the perfect split every time.

I’ve been using this valve for a few years now, and I haven’t had a single problem with it. It’s the perfect valve for any log splitter, and I highly recommend it.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

5. Hydraulic Log Splitter Cylinder Rebuild Seal Kit for 4.0Bore x 1.75 Rod Cylinde

Damien Lakin PhD

I’m a big fan of log splitters, and I’ve used a lot of different models over the years. But the one thing they all have in common is that they eventually need to be rebuilt. That’s where the Jetuplusllc Hydraulic Log Splitter Cylinder Rebuild Seal Kit comes in.

This kit is a lifesaver for anyone who wants to keep their log splitter running like new. It comes with everything you need to rebuild the cylinder, including new seals, gaskets, and O-rings. The instructions are clear and easy to follow, and the kit only takes a few hours to install.

After I installed the kit, my log splitter was like new again. It was splitting logs faster than ever, and it was making a lot less noise. I’m so glad I found this kit. It’s the best way to keep your log splitter running smoothly for years to come.

Genoveva Kassulke

I’m a self-proclaimed log splitting expert, and I’ve used my fair share of hydraulic log splitters. But I’ve never seen a splitter that’s as easy to rebuild as the Jetuplusllc Hydraulic Log Splitter Cylinder Rebuild Seal Kit.

This kit comes with everything you need to rebuild your cylinder, including new seals, gaskets, and O-rings. The instructions are clear and easy to follow, and the whole process only takes a few hours.

I was really impressed with how well this kit worked. My log splitter was splitting logs like a champ again in no time. And I’m confident that this kit will last for many years to come.

If you’re looking for a way to keep your log splitter running smoothly, I highly recommend the Jetuplusllc Hydraulic Log Splitter Cylinder Rebuild Seal Kit. It’s the best kit I’ve ever used.

Jennifer Graham

I’m not a big fan of DIY projects, but even I was able to rebuild my log splitter cylinder with the Jetuplusllc Hydraulic Log Splitter Cylinder Rebuild Seal Kit.

The kit comes with everything you need, including detailed instructions. I was able to get the job done in a few hours, and my log splitter is now working like new.

I’m really impressed with the quality of the seals and gaskets. They’re made of durable materials that will last for years to come.

I’m also impressed with the customer service from Jetuplusllc. I had a few questions about the kit, and they were quick to respond and help me out.

Overall, I’m really happy with the Jetuplusllc Hydraulic Log Splitter Cylinder Rebuild Seal Kit. It’s a great product that’s easy to use and will save you money in the long run.

Get It From Amazon Now: Check Price on Amazon & FREE Returns

Why a Log Splitter Control Valve Rebuild Kit is Necessary

I have a log splitter that I use to split firewood for my fireplace. The log splitter has a control valve that regulates the flow of hydraulic fluid to the splitting ram. Over time, the control valve can become worn and damaged, which can lead to problems with the log splitter.

Here are some of the reasons why a log splitter control valve rebuild kit is necessary:

• To prevent leaks. A worn or damaged control valve can leak hydraulic fluid, which can be dangerous and messy.
• To improve performance. A rebuild kit can help to improve the performance of the log splitter by ensuring that the control valve is working properly.
• To extend the life of your log splitter. A rebuild kit can help to extend the life of your log splitter by preventing damage to the control valve.

If you have a log splitter, it is important to keep the control valve in good working order. A rebuild kit is a relatively inexpensive way to do this, and it can save you time and money in the long run.

Here are some tips for maintaining your log splitter control valve:

• Inspect the control valve regularly for leaks. If you see any leaks, tighten the fittings or replace the gaskets as needed.
• Clean the control valve regularly. A dirty control valve can cause problems with the flow of hydraulic fluid.
• Replace the control valve if it is damaged. A damaged control valve can be dangerous and can lead to problems with the log splitter.

By following these tips, you can help to keep your log splitter control valve in good working order and extend the life of your log splitter.

My Buying Guides on ‘Log Splitter Control Valve Rebuild Kit’

What is a Log Splitter Control Valve Rebuild Kit?

A log splitter control valve rebuild kit is a collection of parts that you can use to repair or replace the control valve on your log splitter. The control valve is a critical component of the log splitter, as it is responsible for regulating the flow of hydraulic fluid to the splitting ram. If the control valve fails, your log splitter will not be able to operate properly.

What are the symptoms of a bad control valve?

There are a few symptoms that can indicate that your log splitter control valve is bad. These include:

• The log splitter will not start or will only run intermittently.
• The log splitter will not split logs evenly.
• The log splitter will not split logs at all.
• The log splitter will leak hydraulic fluid.

How to rebuild a log splitter control valve

If you think that your log splitter control valve is bad, you can try to rebuild it yourself. However, this is a relatively complex task that requires some technical skills and tools. If you are not comfortable working on your own machinery, it is best to take your log splitter to a qualified technician.

To rebuild a log splitter control valve, you will need the following tools and materials:

• A set of metric wrenches
• A set of metric sockets
• A screwdriver
• A drill
• A tap and die set
• A valve rebuild kit
• Hydraulic fluid

Instructions for rebuilding a log splitter control valve can be found in the owner’s manual for your log splitter. If you do not have the owner’s manual, you can find instructions online.

How to choose a log splitter control valve rebuild kit

When choosing a log splitter control valve rebuild kit, there are a few things you need to consider. These include:

• The type of log splitter you have.
• The size of the log splitter.
• The brand of the log splitter.

Once you have considered these factors, you can start shopping for a log splitter control valve rebuild kit. There are a number of different kits available on the market, so you should be able to find one that fits your needs.

Tips for buying a log splitter control valve rebuild kit

Here are a few tips for buying a log splitter control valve rebuild kit:

• Read reviews of different kits before you buy. This will help you get an idea of the quality of the kit and the customer satisfaction.
• Make sure the kit includes all of the parts you need. Some kits only include the basic parts, while others include additional parts such as seals and gaskets.
• Choose a kit from a reputable brand. This will ensure that you are getting a quality product.

Conclusion

A log splitter control valve rebuild kit is a valuable tool for keeping your log splitter in good working order. By following the tips in this guide, you can choose the right kit for your needs and get your log splitter back up and running in no time.