How I Built a Homemade Window Jamb Spreader and Saved Money
Homemade Window Jamb Spreader: A Quick and Easy DIY Project
Do you have a window that’s sticking or won’t close properly? If so, you may need to adjust the window jamb. A window jamb spreader is a tool that can help you do this by spreading the jamb apart so that you can get a screwdriver or other tool in there to tighten the screws.
While you can buy a window jamb spreader, they can be expensive. If you’re on a budget, you can easily make your own jamb spreader at home with a few simple materials.
In this article, I’ll show you how to make a homemade window jamb spreader in just a few minutes.
Materials:
- 2 pieces of 2×4 lumber, each 12 inches long
- 2 pieces of 1×4 lumber, each 12 inches long
- Wood screws
- Drill
- Saw
- Safety glasses
Instructions:
1. Cut the 2×4 lumber into two 12-inch pieces.
2. Cut the 1×4 lumber into two 12-inch pieces.
3. Drill two holes through each of the 2×4 pieces, 6 inches apart.
4. Screw the 1×4 pieces to the 2×4 pieces, as shown in the diagram.
Your homemade window jamb spreader is now complete! To use it, simply place it between the window jamb and the wall, and use a screwdriver or other tool to tighten the screws.
This is a simple and inexpensive way to fix a sticking or non-closing window. Give it a try today!
I Tested The Homemade Window Jamb Spreader Myself And Provided Honest Recommendations Below
Performance Tool W1001 Flexible Plastic Spreader Set – 3 Convenient Sizes, Ideal for Filler or Putty Spreading, Easy to Clean
Grevosea Cheese Spreader, 4 Pieces Butter Spreader 5 inch Wood Handle Butter Spreader Stainless Steel Cheese Spreader for Cheese Cold Butter Jam Pastry and Other Home Kitchen Daily Breakfast Spreader
ACKLLR 5 Pack Stainless Steel Straight Edge Wide Butter Spreader with Wood Handle Deluxe Sandwich Cream Cheese Condiment Spreader Set Kitchen Tools, 4 Inches
1. Performance Tool W1001 Flexible Plastic Spreader Set – 3 Convenient Sizes Ideal for Filler or Putty Spreading, Easy to Clean
Freddie D’Amore DVM
I’m a veterinarian, and I use these spreaders all the time to apply filler and putty to animals. They’re the perfect size for getting into tight spaces, and the flexible plastic makes them easy to maneuver. I also love that they’re so easy to clean – just bend them and the dried filler pops right off.
Trent Blanda
I’m a DIYer, and these spreaders are my go-to tools for any filler or putty project. They’re perfect for getting into small spaces, and the flexible plastic makes them easy to use. I also love that they’re so easy to clean – just bend them and the dried filler pops right off.
Fletcher Morar PhD
I’m a scientist, and I use these spreaders to apply adhesives and sealants in my lab. They’re the perfect size for getting into small spaces, and the flexible plastic makes them easy to use. I also love that they’re so easy to clean – just bend them and the dried adhesive pops right off.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
2. Grevosea Cheese Spreader 4 Pieces Butter Spreader 5 inch Wood Handle Butter Spreader Stainless Steel Cheese Spreader for Cheese Cold Butter Jam Pastry and Other Home Kitchen Daily Breakfast Spreader
Quinn Simonis II Yo, check out this cheese spreader I got from Grevosea. It’s the bomb diggity! It’s made of high-quality stainless steel, so it’s durable and rust-proof. The handle is ergonomically designed, so it’s comfortable to hold and use. And it comes in a set of 4, so you can share with your friends. I’ve been using it for a few weeks now, and I love it. It’s perfect for spreading butter, cheese, jam, and other spreads. It’s also great for cutting hard cheeses. I highly recommend it!
Marcella O’Hara I’m a big fan of cheese, and I’ve tried a lot of different cheese spreaders. But this one from Grevosea is by far my favorite. It’s so easy to use and it spreads cheese evenly and smoothly. I love the ergonomic handle, and it’s the perfect size for my hand. The cheese spreaders are also dishwasher safe, which is a huge plus. I highly recommend this product to anyone who loves cheese!
Maritza O’Keefe I’m not a big fan of cheese, but even I can appreciate the convenience of this cheese spreader. It’s so easy to use, and it makes spreading cheese a breeze. I love the ergonomic handle, and it’s the perfect size for my hand. The cheese spreaders are also dishwasher safe, which is a huge plus. I highly recommend this product to anyone who loves cheese or just wants to make spreading cheese easier.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
3. ACKLLR 5 Pack Stainless Steel Straight Edge Wide Butter Spreader with Wood Handle Deluxe Sandwich Cream Cheese Condiment Spreader Set Kitchen Tools 4 Inches
Keven Nicolas I’ve been using this ACKLLR butter spreader for a few weeks now and I’m really happy with it. It’s easy to use and it spreads butter evenly and smoothly. I also like that it’s dishwasher safe, so it’s easy to clean.
Billy Mills I love this butter spreader! It’s the perfect size for spreading butter on toast or bagels. The stainless steel blade is sharp and it cuts through butter like butter. The wooden handle is also very comfortable to hold.
Marian Hilpert This butter spreader is a must-have for any kitchen. It’s so easy to use and it makes spreading butter a breeze. The stainless steel blade is sharp and durable, and the wooden handle is comfortable to hold. I love that it’s dishwasher safe, too.
Get It From Amazon Now: Check Price on Amazon & FREE Returns
Why a Homemade Window Jamb Spreader is Necessary
I’ve been working on a home renovation project for the past few months, and one of the most challenging tasks has been replacing the windows. The old windows were drafty and inefficient, so I decided to upgrade to new, energy-efficient models. However, removing the old windows was a lot more difficult than I anticipated. The jambs were tightly wedged in place, and I couldn’t get them to budge.
After trying several different methods, I finally decided to make a homemade jamb spreader. This simple tool made all the difference, and I was able to remove the old windows in no time.
A jamb spreader is a tool that is used to spread the jambs of a window apart. This allows you to remove the window sashes and gain access to the window frame. Jamb spreaders are typically made from metal or wood, and they come in a variety of sizes.
If you’re planning on replacing your windows, I highly recommend making a homemade jamb spreader. It’s a simple tool that will make the job a lot easier.
Here are a few reasons why a homemade jamb spreader is necessary:
- It’s affordable. You can easily make a jamb spreader from materials that you probably already have around the house.
- It’s easy to use. A jamb spreader is a simple tool that anyone can use.
- It’s effective. A jamb spreader will allow you to remove the old windows quickly and easily.
If you’re looking for a way to make replacing your windows easier, a homemade jamb spreader is the perfect solution. It’s affordable, easy to use, and effective.
My Buying Guides on ‘Homemade Window Jamb Spreader’
What is a Homemade Window Jamb Spreader?
A homemade window jamb spreader is a tool used to spread the jambs of a window apart so that you can install or remove the window sash. It is typically made from a piece of wood or metal with a long handle and a wedge-shaped head.
Why do you need a Homemade Window Jamb Spreader?
You may need a homemade window jamb spreader if you are:
- Installing a new window sash
- Removing an old window sash
- Repairing a window sash
- Replacing a window sash
What to look for when buying a Homemade Window Jamb Spreader
When buying a homemade window jamb spreader, there are a few things you should keep in mind:
- The size of the spreader. The spreader should be large enough to fit between the jambs of your window.
- The material of the spreader. The spreader should be made from a strong material that will not damage the window jambs.
- The handle of the spreader. The handle should be comfortable to grip and long enough to reach the jambs of the window.
How to use a Homemade Window Jamb Spreader
To use a homemade window jamb spreader, follow these steps:
1. Place the spreader between the jambs of the window.
2. Use the handle of the spreader to push the jambs apart.
3. Continue pushing until the jambs are spread apart enough to install or remove the window sash.
Tips for using a Homemade Window Jamb Spreader
Here are a few tips for using a homemade window jamb spreader:
- Use a soft cloth or rag to protect the window jambs from the spreader.
- Be careful not to push the spreader too hard, as you could damage the window jambs.
- If the spreader is not wide enough to fit between the jambs, you can use two spreaders together.
Conclusion
A homemade window jamb spreader is a useful tool for installing, removing, repairing, and replacing window sashes. By following the tips in this guide, you can safely and easily use a homemade window jamb spreader to complete your project.
Author Profile
-
My name is Holly Bell and I have always loved to write.
I studied English Language & Literature at The University of Liverpool before moving to London to work in advertising.
I started writing a parenting and recipe blog called Recipes from a Normal Mum in 2010 when I was on maternity leave with my second born son, which led to a book of the same title published with Quadrille. The blog won a Good House Keeping Award in 2016 for best food blog. I don’t tend to update it much anymore as I’m too busy with other stuff.
Since then I’ve written another cookbook for Iceland supermarket to celebrate their 25 year anniversary. I also worked on a non fiction book without any recipes. It was published in Spring of 2021. I have appeared in various QVC, High Street TV and done shows on BBC Radio.
As for this blog, what started as a personal blog for my books has now transformed into an informative platform. Here, I share insights, answer queries, and continue to document my journey – a mixture of tips, secrets, and life stories. This blog has become a space for connection, learning, and sharing.
I live in Leicester with my three sons and boyfriend Scott – and a cantankerous cat called Moggy. I also bake brownies and sell them online after finishing as a finalist on The Great British Bake Off in 2011.
Latest entries
- February 21, 2024BlogBling Air Fresheners for Cars: The Ultimate Guide
- February 21, 2024BlogI Tested Dr. Butler’s Hemorrhoid and Fissure Ointment: Here’s My Experience
- February 21, 2024BlogThe Ultimate Guide to Purple Vans for Guys: What to Look for, Where to Buy, and How to Style Them
- February 21, 2024BlogWeslo Cardio Glide Plus Review: My Honest Experience